I want a 25' mega tree next year. Is it safe to use 3" SCH 40 PVC? Any taller i would not dare use pvc, but would 3 pieces of 3" be able to withstand wind? I know it would be strong enough but just not sure on the over all design. Any advice is much appreciated. I know people have built 20' tree's out of 3" pvc no problem. Just not sure if another 5' would be safe to do. I would have 8 guy wires holding it up. with turnbuckles and all that. I'm just not sure. Since i was going to build 2 20' mega tree's next year and one 25' one i want to go cheap. But i might not on the 25 footer because i don't want it to fall over. At the joints of the 25 footer i could put a brace in there to help hold it together. Also i would probably have t least 30 light strands hanging on it, but as i said already 3" pipe is really sturdy.
For something that size you need to consult a Engineer. A metal pole would be much stronger and likely easier to construct.
Well i was planning on a 30' tree but that is $350 for one tree. I can build 3 smaller tree's for the same price. Metal would definitely be the way to go, but i still have to figure up a price for it. I could design it the same way as my 30 ft one but smaller scale.
it could be possible as long as you have lots of guide wire everywhere to support the side way tension force ,,, so it wont bend ... my 27 ft used a scedule 80 aluminum and it almost want to bow in the center ,,, but my tree string are made of emt 1/2 steel so there is a lots of weigh on one side ... so its all depend what type of light u using ,,, cheer
The only advice I have would be to strongly consider metal poles... I've learned the hard way that metal bends and plastic snaps (especially in cold weather or exposed to UV).
