12 strip ray tree
 
Notifications
Clear all

12 strip ray tree

9 Posts
3 Users
0 Reactions
4,847 Views
DrNeutron
Posts: 2016
Topic starter
(@drneutron)
Noble Member
Joined: 14 years ago
[#28992]

Hi Guys:

Wondering if anyone has created a 10 - 12ft ray tree and how it looks? I am looking at building one next year and wanted the height to be roughly 1/2 a strip of the 5M strips from ray or
3M max.....I wanted to make it 12 strips wide for a 180 degree tree. Anyone have one around this dimension that I could see in action? Most everyone keeps it a full strip length and just wondering how a smaller one would look.
Thanks.


8 Replies
DrNeutron
Posts: 2016
Topic starter
(@drneutron)
Noble Member
Joined: 14 years ago

No one built one this height???
Ok....
Anyone have a video of a 12 strip ray tree using 1IC/LED 30LED/M strip?
I am looking at building a ray tree this year and am back and forth between the 1IC/LED and the 1IC/3LED strip. The biggest differences I can see is the more granular control, but also the voltage. The 1IC/3LED comes in 12V and the 1IC/LED is 5V so using 12V would make it easier since all my other gear will be 12V and voltage drop will be less of an issue. I am just wondering if the resolution is worth it for displaying pictures and text from say....50ft away.
Anyone?


Reply
tucsonlights
Posts: 667
(@tucsonlights)
Honorable Member
Joined: 15 years ago

I just ordered 12v ink1003 1ic/led from ray wu. I plan on using 12 strips 2.5m in length for a total of 75 pixels each strip. I am going to use a 180 degree ray arrangement.


Reply
Posts: 112
(@rogelio)
Estimable Member
Joined: 15 years ago

I have not built a tree yet. I am still researching like yourself. I can add some info on the strips though. There are strips that have 1 chip for each led, 1 chip for 3 leds, (all controlled together like 1 led), and 1 chip for 3 leds (each controlled separately). I would not use the 3 leds controlled together as 1 for a mega tree.
The 5 meter strips are about 16 feet long so that will yield an 8 foot tree. The controller you plan to use may help dictate which pixel you use which may determine the voltage. though there always are exceptions.


Reply
DrNeutron
Posts: 2016
Topic starter
(@drneutron)
Noble Member
Joined: 14 years ago

I looked at those, but wasn't sure if the E682 can control them......I haven't found anyone who has used that strip yet.
Please update when you get them and how they work out.


Reply
Page 1 / 2
Share: