Hello All,
What are most people going with, 2 or 3 inch spacing? Is 2 inch spacing too close?
Thanks
R/
Mike
funstick wrote:Hello All,What are most people going with, 2 or 3 inch spacing? Is 2 inch spacing too close?
Thanks
R/
Mike
I think it depends alot on the application and the distance the element will be from the viewers. The further away the viewers will be the further spacing you can get away with.
In my experience 3" spacing works just fine for everything.
Thanks!
funstick wrote:Thanks!
I have one Mega tree with 2 inch spacing, and one with 3 inch spacing... I found that for obvious reasons, the graphics on the 2 inch are much better, so when not running the same thing on both trees, I almost always do the graphics on the the 2 inch spaced tree. But as didjareally said, distance from the viewing public means everything. My viewing public is very close, but when you are a distance away, frankly you can't tell the difference. Here is a video for your own comparison, video taken from approx. 50 feet away in the neighbors entry way : ) ...2 inch on the left, 3 inch on the right
Wow
I really like your display
So you have any close up of your pixel house outline or any more info
What pixels your using?
What covers if any ?
Thank you in advance
Stephen
I will second teh like for your house and display! Very nicely done.
I wanted to comment on your display as well. Very clean, well thought-out, it just makes a nice visual impact overall. Care to share any specifics on how you did ______?
1) what method did you use to affix the pixels outlining your roof line, window frames, and garage?
2) any use of power-injection on these outlines, or are they all 100 pixels max home-runs to the controller?
3) how tall are your mega trees?
4) which controller/software combo are you using to animate the Singing Trees? (one of my favorite parts of your show)
4a) if something OTHER than LOR- please go into more depth, as this is something I'm currently researching for my own purposes.
I would think that others could benefit from this as well.
I like the Vikesters alot. Mine follows the same philosophy but not as neat and tidy. I use GECE's 10" spacing? on the roofline and my Mega Trees. they are 20' tall. I implemented a lot of ws2811's this past year. The star and it's trail are 3" spacing. The North Pole posts are wrapped 3" spacing. Her's a video. Best in HD. Our lot is wide 175' and I am in the neighbor's front yard/almost side shooting with my drone.
kartingted wrote:Wow
I really like your display
So you have any close up of your pixel house outline or any more info
What pixels your using?
What covers if any ?Stephen
Thanks Stephen
No close ups that I can think of ,but I'll check when I get on my home computer....all pixels are 2811 square back from Ray for all the house outline stuff, windows, etc They are 6 inch spacing. Honestly, would be happier with even a little more, perhaps 9 inch, but I'm going to scale back the brightness a bit this year for video purposes so it doesn't look like strips when videoing. The windows I made wood frames and then snap PVC onto the frames, so all my lights are zip tied to the PVC, with PVC alone for the top since my windows are curved, the bend of the PVC and the pressure between each end keeps it snuggly in place. Put up the windows in about 2 minutes.
Garage has a 2x2 wood frame that I attached and painted the same color as the trim, that stays up year round, I just put the pvc clips on and snap snap snap.
I built some stuff for the roof which I can't explain without pictures, which I do have pictures of that....again, for me, its all about snap in place, goes quickly
