Pixel Matrix input
 
Notifications
Clear all

Pixel Matrix input

28 Posts
14 Users
0 Reactions
13.5 K Views
Posts: 327
(@thebaronn)
Reputable Member
Joined: 17 years ago
Kev7274 wrote:Do you paint it black now? or was that when you could get the white/black?

That stuff was from 2012 and 2013 when I could get the black coro with ease. Now? I don't know what I would do. I mean paint sticks pretty good to coro, but its hard to say if it would stay on nice and neat after pressing all the pixels through.

I did not use any pixels for new stuff, I pretty much stayed away from them this year. But I did paint a lot of coro this year and after the wind taking down the majority of the display, I put it right back up and didn't have to touch up anything, so my hopes are high for whatever I do next year.


Reply
Kev7274
Posts: 2037
Topic starter
(@kev7274)
Famed Member
Joined: 13 years ago

I did some numbers as to how many pixels strings I would need and come up with the following number.Let me know if I am adding it up wrong.

Size: 48" x 54"
Pixels per row(2" center): 24
Rows:54
24 x 54=1296 pixels
1296 divided by 50 pixels per string= 25.92 strings

Is this right? Thanks


Reply
Posts: 327
(@thebaronn)
Reputable Member
Joined: 17 years ago
Kev7274 wrote:I did some numbers as to how many pixels strings I would need and come up with the following number.Let me know if I am adding it up wrong.

Size: 48" x 54"
Pixels per row(2" center): 24
Rows:54
24 x 54=1296 pixels
1296 divided by 50 pixels per string= 25.92 strings

Is this right? Thanks

I think that if u go 2" spacing on one axis, you should use the same spacing on the other axis.

From my experience 2" looked good from the opposit side of the street, but from the close side of the street, not so much.


Reply
Kev7274
Posts: 2037
Topic starter
(@kev7274)
Famed Member
Joined: 13 years ago

so go 2" left to right (48") and 2" top to bottom (54") ?
So im every other hole left to right and top to bottom?
That would give me 24 across and 27 down?

24x27=648 divided by 50 pixels per string=12.96 strings?


Reply
Electrified3
Posts: 716
(@electrified3)
Prominent Member
Joined: 13 years ago

Keeping it somewhat linear x to y is a good thing, so if 2" wide go 2" tall, if you go 1" wide go 1" tall.

May I suggest you go 1 1/2" spacing both x and y, 32 pixels wide (48") x 36 rows tall (54") gives you the same 1296 pixels but linear both x and y and gives you the dimension you quoted?

1 1/2" works very well for that kind of setup, not going to be video quality but will look good for effects, text etc. But will throw another one at you, instead of using standard pixels, use strips, 30/M and space them every 1 1/2", when I worked that out it was quite a bit cheaper to build than using the bullets? Just order the strips pre-made to the length you need will make life a lot easier.


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

I am using square nodes with 1¼ spacing . Video is no problem and with Hls you can sync audio with video perfectly .


Reply
Posts: 238
(@ronp5683)
Reputable Member
Joined: 14 years ago
Reply
Posts: 1115
(@11bravo)
Noble Member
Joined: 14 years ago

is it possible to do the same thing with a LED HDTV screen?


Reply
Page 3 / 3
Share: