I think I have decided to do a pixel matrix next year and wanted to see what designs,materials,etc that you guys used. I plan on putting it on the front windows of the house which is 48"w x 54"h. I looked at some offerings that are already made,but they are to small for my needs.Ideas and suggestions are appreciated.Thanks
I built a 50x25 pixel matrix with about 1.3" spacing. This makes it about 65"W X 32.5"T. All driven by an E6804 (500 pixels per output)
I used 5050 strips but am not happy with the output.
They look FANTASTIC when using solid colors with text -- I also do some Nutcracker effects with text overlapping that look great. Pictures, however, seem impossible to get to look nice. If they are red, green and blue pictures -- or single color pictures they look nice. As an example, I put Olaf on the matrix and he looked like a white blob. I played with the dimming curve in Vixen, which helped, but I still couldn't get it to look even acceptable. It could be my lack of knowledge regarding color mixing.
Anyway, I love the matrix. I use it to send messages to viewers that have sent a text message to my show but I ran into limitations that you may want to consider.
I would start with what do you want to display and how much money you want to spend first.
If you want video and so forth then you will need a high density matrix, I have been using 60LED/M strips for these with some great results. The one I built was pretty intense, 90 rows x 216 long, so almost 20,000 pixels, used 12 E682's and 24 power supplies. The drawback is cost for the strips and controls. Here is the latest one I built:
I had tried with strips 30 LED/M but to produce video it is difficult, not enough density. I tried using bullets on a 1" x 1" grid, difficult to control intensity, requires a significant amount of power and started to get costly.
In the end for myself using the polycarbonate panels with 16mm spacing and pulling 60 LED/M strips into it worked out best for what I wanted to do.
So, I would start with what is the end result you are looking for and your budget, then start looking at options from there. If just using text and simple effects a lower density matrix will work fine.
What are you using to program the E682's this is exactly what I am looking to do for next Christmas, but at about 16' long and 4' high. Any suggestions?
Check out the Johnson family light show on YouTube he has a vid how he made his. Also check his post in the how to's
Yea I saw that, but I wanted a much more higher density display to be able to play videos on it. The johnsons are also using LOR and I am using Vixen
In mine I used XLights for the sequencing, was very easy to work with.
Don't think I want to do any sort of video,but that looks cool. Then again,who knows.
I'm thinking of using Matts design and just adjusting the size to fit my needs. Seems simple enough.
Jasonseither wrote:Yea I saw that, but I wanted a much more higher density display to be able to play videos on it. The johnsons are also using LOR and I am using Vixen
He uses Vixen 3 and the Falcon Pi Player
CORO!!!! + Square Pixels!!!!! Easy Peasy!!
I love the stuff. I used it in my 2012 rectangular Matrix
And in my 2013 Clock Tower Matrix

