Wrapping Real Tree ...
 
Notifications
Clear all

Wrapping Real Tree Trunks

4 Posts
4 Users
0 Reactions
2,324 Views
Posts: 13
Topic starter
(@justaplaneguy)
Eminent Member
Joined: 5 years ago
[#58305]

I'm trying to figure out what to wrap my tree trunks with LED wise and what the easiest method would be. The question being around, what type of addressable pixels to use? I see all these displays with people wrapping their tree trunks in their yards but I'm not sure what they're using. Strips of WS2811 LEDS? Net Pixels? Does anyone have any idea?


3 Replies
Posts: 429
(@mikekrebs)
Reputable Member
Joined: 12 years ago

Not strips usually. Strings of ws2811 or net pixels. Lots of nets on tree trunks.


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

WS2811 3:1 strips is what i used


Reply
joeytx
Posts: 249
(@joeytx)
Reputable Member
Joined: 19 years ago

I use to use WS2811 square pixels but switched to bullet pixels and they look pretty good. The bullets "stick" out from the bark. I nave 6 reallybig oak trees. On the front trees i go up the ranches.
The square pixels allowed water to enter between the silicone and the epoxy, which caused failures. Gave up on them in my entire display.


Reply
Share: