Notifications
Clear all

Defusers

8 Posts
5 Users
0 Reactions
11.7 K Views
Posts: 582
(@jimboha)
Honorable Member
Joined: 12 years ago

I used the translucent film in my Tune-to sign. Here are some photos of the incomplete sign.

IMAG4055

. . .

IMAG4056

Note that I used a black vinyl cut of (reverse) of the 7-segment digits in a 188.8 format. I use black electrical tape to block out the various segments to leave the desired frequency. This results ins a transflective display. Trans-flective means trans-parent + re-flective. This makes it visible in the daytime as white characters, and at night with the colors from the LEDs behind.

Jimboha


Reply
tecnageek
Posts: 220
Topic starter
(@tecnageek)
Reputable Member
Joined: 10 years ago

I am currently using black coro, but will attempt a test with white. Excellent idea.


Reply
Posts: 890
(@ben-bobbi)
Noble Member
Joined: 17 years ago

you could use the white coro and paint it. It works pretty good for us. Only using LED on these, but RGB should work too. The LED's are stuck into the back panel pointing toward the front.

http://doityourselfchristmas.com/forums/showthread.php?38069-Looking-for-Fun-Tombstone-names/page3&highlight=tombstone+names


Reply
Page 2 / 2
Share: