Pixel node press
 
Notifications
Clear all

Pixel node press

17 Posts
10 Users
0 Reactions
13 K Views
Posts: 7
Topic starter
(@jim-c-2)
Active Member
Joined: 8 years ago
[#48822]

I cobbled this together after pushing 4 pixels into a strip.
I know it’s been done before. My friend mentioned seeing a press on Facebook.

I had 18 strands to do. 62 lights per strand . About 7 minutes per strand to install the lights.


16 Replies
Posts: 7
Topic starter
(@jim-c-2)
Active Member
Joined: 8 years ago

I cobbled this together after pushing 4 pixels into a strip.
I know it’s been done before. My friend mentioned seeing a press on Facebook.

I had 18 strands to do. 62 lights per strand . About 7 minutes per strand to install the lights.

<


Reply
Posts: 7
Topic starter
(@jim-c-2)
Active Member
Joined: 8 years ago

I cobbled this together after pushing 4 pixels into a strip.
I know it’s been done before. My friend mentioned seeing a press on Facebook.

I had 18 strands to do. 62 lights per strand . About 7 minutes per strand to install the lights.


Reply
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

How much downward force does that actuator put on it?
What if you don't get your hand out of the way in time?

I like the idea, the automatic nature scares me a bit.


Reply
Posts: 7
Topic starter
(@jim-c-2)
Active Member
Joined: 8 years ago
algerdes wrote:How much downward force does that actuator put on it?
What if you don't get your hand out of the way in time?

I like the idea, the automatic nature scares me a bit.

You can use a foot pedal instead of the cycle timer. I will do the math on exact pressure. It will definitely smash a finger.

I did 1200 lights, no mishaps. The time cycle can be adjusted. I started off with a slower cycle time.


Reply
Page 1 / 4
Share: