Notifications
Clear all

Defusers

8 Posts
5 Users
0 Reactions
11.7 K Views
tecnageek
Posts: 220
Topic starter
(@tecnageek)
Reputable Member
Joined: 10 years ago
[#48780]

I am working on making a few coro-tombstone props with family member nicknames on them, and what I want to do is cut out the names in the stones and light up behind the cut-out letters, but could use some advice or recommendations on what to use as a light defuser. Letters will be about 3"x3"


7 Replies
Posts: 582
(@jimboha)
Honorable Member
Joined: 12 years ago

Got to ebay. Enter "translucent plastic sheet".

There are many types and translucency levels. Thicker are less, thinner more. Unfortunately you have to experiment a bit.

Jimboha


Reply
tecnageek
Posts: 220
Topic starter
(@tecnageek)
Reputable Member
Joined: 10 years ago

Thanks MikeKrebs and Jimboa, great suggestions. To MikeKrebs , I will be using ws2811 bullets for the outline of the stones that are indeed caro. I will likley need to make-shift some sort of small box to house the lights that will be behind the lettering, and will use ether ws2811 bullets, or ws2812b strips. Depending on what works with what I cobble together.


Reply
Posts: 100
(@little-b)
Estimable Member
Joined: 9 years ago

I use white coro for my tune in signs with an old led rope light inside. My signs, I think, are 24" x 18" x 4". I had a local sign shop print them so the letters are white (blank white coro) and the rest is black.


Reply
Posts: 1592
(@ruppro)
Noble Member
Joined: 11 years ago

Don't "cut out" the letters, only remove the back layer and flutes, leaving the front layer as your diffusing material, assuming white coro. can paint the rest for a better look in the daylight,


Reply
Page 1 / 2
Share: