Well my understanding is that you will still need the rectifier - to change AC to DC. My guess is that because it's a big long string, there's probably enough LEDs in each series to bypass needing a resistor. If it's not there in the original, you probably don't need it. So you just need the 4 diodes (the black things with the grey stripe).
As for cutting it up into sections, you can do that, but you have to be careful. Easiest way is to cut it into the different series.
Hey thanks for the reply.
The four diodes on the board. Do they just go in place of the resistors shown in the diagram in Profs post?
If I where to cut this string up should I then replace them with appropriate resistors or should I be using both?
Also I was under the impression that the SSROZ was for AC applications. I am new to this sort of thing but I also assumed that the tranny put out AC. If this one puts out DC will I be able to use the SSROZ or will I have to use a DC version?
Thanks for putting up with us newbys.
Josh
A small amount of knowledge can be a dangerous thing
Oh boy . . . I'm a newbie too! We are like a disease, almost. 😉 I try to answer questions as a way of paying forward the help I've received. John (wjohn) gave an excellent explaination of LEDs/rectifiers/AC and DC at the Melbourne Mini on the weekend. So this is a good way of making sure I've understood it all!
Leave the diodes as they are. See the pics a few posts up - it's a case of remove everything all bar the diodes. As for the SSRs, I think you connect before the diode so the current is still AC. I'll take a pic of the LEDs I've already connected to an SSR to show you. Give me a tick.
joshlisa,
Do you want to control the individual channels on the lights (there are 4) or do you just need to have all the lights in the string come on together.
Craig.
joshlisa - can you also take a pic of the box and the lights as well? The lack of current limiting resistors is interesting.
Tim
