Helix Ether-Node Co...
 
Notifications
Clear all

Helix Ether-Node Controller

108 Posts
8 Users
0 Reactions
73.4 K Views
Posts: 947
(@warlock)
Noble Member
Joined: 19 years ago

So am I. It has to be something with your config file. Can you talk to the node via the xbee ???? With your files on the card do they all have data on them as I have had that issue myself where the firmware never loaded on the sd card


Reply
Posts: 300
(@kiowamike)
Reputable Member
Joined: 18 years ago

From what I can tell all the SD cards have good data on them. My next thought is that the EEPROM that came with the ethernode is bad or corrupt. Can I reprogram it with a prop plug using the firmware from the SD card?


Reply
Posts: 947
(@warlock)
Noble Member
Joined: 19 years ago

Nope you can't you would jave to get it off Greg. What are the size of the files on the sdcard ???? You can get to thos by putting the sdcard into ypur computer. Open it up to read the files then click on each file and click on properties to see the size of each file.


Reply
Posts: 300
(@kiowamike)
Reputable Member
Joined: 18 years ago

The config file is 2 KB and the firmware file is 32KB. I can open the config file in note pad and see data there.


Reply
Posts: 947
(@warlock)
Noble Member
Joined: 19 years ago

Good. What about your other files for the node sdcard ????


Reply
Page 18 / 22
Share: