Helix Ether-Node Co...
 
Notifications
Clear all

Helix Ether-Node Controller

108 Posts
8 Users
0 Reactions
73.4 K Views
Posts: 191
(@mlevings)
Estimable Member
Joined: 14 years ago

Yes, I have 2 LOR controllers and a Renard 64. I am using dmx and renard outputs on a E6804 for all 3. It works flawlessly. I'm currently running 5 x E6804's, 3 E682's, 2 LOR CTB16, and 1 Renard 64XC.


Reply
Posts: 300
(@kiowamike)
Reputable Member
Joined: 18 years ago

I think at this point I'm at my wit's end. For some reason I can't get my Ethernode to connect to the NC. I have tried both wired and wireless communication and V3 and V2 main boards with no success.
my setup is as follows:
Network controller
Ether Node
E1.13 Bridge
Renard SS8 (for testing purposes. the final output will be to 10 REN PX1's)
I don't get any activity from the Ethernode. The heartbeat flashes and the stopped led illuminates. When using the wireless mode, the AI and TX LED's work as advertised. When the Ethernode is connected to the Bridge, the link and 100 light illuminate. I would appreciate any help from the group.

channel map
ether node
e131
e131 2

Reply
Posts: 373
(@blantrip)
Reputable Member
Joined: 16 years ago

Try s levying unicast instead of multicast.

I'm at my wits end also. This worked last year, added more pixels now but can't get it to work.

Arggh


Reply
Posts: 947
(@warlock)
Noble Member
Joined: 19 years ago

2 things I noticed in you e682 no 1 config pic. 1 your last universe is not assigned ( universe 6 which has 150 channels) and 2 your config page has no board designated for what you are using. It says no board selected bit named e682 no 1. Might be the issue


Reply
Posts: 191
(@mlevings)
Estimable Member
Joined: 14 years ago

Kiowamike, looking at your configs, you have the ethernode ip at 192.168.10.10 which is the default. You have your bridge on 192.168.1.206. They are not on the same subnet. From my experience last year, I would keep the ethernodes default ip range and put the bridge on 192.168.10.11 I had problems when I changed it to a different subnet.


Reply
Page 11 / 22
Share: