Helix Ether-Node Co...
 
Notifications
Clear all

Helix Ether-Node Controller

108 Posts
8 Users
0 Reactions
73.4 K Views
Posts: 300
(@kiowamike)
Reputable Member
Joined: 18 years ago

Thanks for the input. I changed the mode to unicast and the IP address on the bridge to 192.168.10.11 with no avail. any other suggestions?


Reply
Posts: 947
(@warlock)
Noble Member
Joined: 19 years ago

Look at your name designation for your board. Its not selected for what controler you are using like your other config page is


Reply
Posts: 300
(@kiowamike)
Reputable Member
Joined: 18 years ago

I assume you're refering to channel bank 1 on the Helix main board configuration page.


Reply
Posts: 947
(@warlock)
Noble Member
Joined: 19 years ago

On post #48 your config page for e682 number 2 doesn't show a board type selected.


Reply
Posts: 300
(@kiowamike)
Reputable Member
Joined: 18 years ago
On post #48 your config page for e682 number 2 doesn't show a board type selected.

I think we got our lines crossed. I'm referencing post 52.


Reply
Page 12 / 22
Share: