Happy Thanksgiving!
I have a Grinch + Ren-C combo with issues and I'm hoping someone else has been down this road before.
My setup consists of a Ren SS 16 > Ren-C with Grinch > Ren SS 16 > Ren SS 24 > Ren SS 24 > Ren SS 24.
The Ren-C is getting it's 5 volt power and ZC signal from the first Ren SS 16. This setup was tested over summer and worked great.
When I first plugged in the setup once everything was out in the yard, the Ren-C's heartbeat LED was flashing (I believe this is normal) and all of the channels on the SS 16's and SS 24's worked properly. The Grinch's channels were faintly flashing and working inconsistently. I thought this was due to a bad solder joint on the Grinch, so I disconnected everything and touched up that joint.
After I "repaired" the Grinch and plugged everything back in, the heartbeat light on the Ren-C no longer blinked and only the first Ren SS 16's channels functioned. The Grinch's channels were all on (even when they weren't supposed to be).
I reflashed the PIC on the Ren-C and that didn't seem to help. Does anyone have any suggestions? Thanks!
mattrob wrote:
The Ren-C is getting it's 5 volt power and ZC signal from the first Ren SS 16. This setup was tested over summer and worked great.
Exactly how are you doing this? The SS series boards weren't designed to pass power or ZC.
If you rigged-up a setup to make it work, what is the distance between the SS16 and the Ren-C? ZC signals do not like traveling over distances. You also may be dropping the 5VDC (due to distance) to something the Ren-C doesn't like.
RavingLunatic wrote:Exactly how are you doing this? The SS series boards weren't designed to pass power or ZC.If you rigged-up a setup to make it work, what is the distance between the SS16 and the Ren-C? ZC signals do not like traveling over distances. You also may be dropping the 5VDC (due to distance) to something the Ren-C doesn't like.
I was drawing the 5V and ZC from the test points off the SS16. I didn't think it was designed to do that, but it seemed to work. The distance is probably 12 feet. That definitely could be part of the problem.
Just as a follow up, I thought I would add what fixed my problem for future reference.
I ended up building a Ren-T to dedicate to the Ren-C and Grinch combo. After moving the Ren-C closer to the Ren SS I was borrowing 5V and ZC from, I watched the heartbeat and realized it was only malfunctioning when I turned on multiple channels of lights. It couldn't seem to handle the necessary power, and adding a Ren-T fixed that problem perfectly (Thanks RavingLunatic for making me realize the error in my ways).
Also, thank you to everyone who took the time to document the Ren-T so thoroughly. I was able to find the information, get the proper parts, and build it in one afternoon because it was so well documented! Thanks!
The Ren-T is an amazing little piece of hardware in a small package. I built mine as well, from etching the board all the way through.
