When in vixen 3 and you go to set up When clicking Setup/Change Serial Port button while configuring the Generic Serial option in Setup Display, the Vixen program freezes with no error code and needs to be forced closed.
This happens when my Arduino is plugged into COM3, However no instances of the Arduino IDE are open and the port is only in use by Vixen (no other program).
I have spent the day looking for a fix but have not found one. Someone else has had the same problem and posted it to the bug section. Any help would be great!!!! thank you in advance!
sorry it is vixen 3.1u1
Okay I think im getting the bugs worked out? I went and got a breakout board and hooked it up neg to neg rx to rx1 on mega and tx to tx1 on mega and then downloaded the drivers for the breakout board. Loaded Vixen and it found both ports and did not lock up. I did not go through the breakout board for the vixen 3. it is going to com port 3 which is what my arduino board is. I now have a blinking light green light on the board, I think it means waiting for data? anyone?
keyman6868 wrote:... I now have a blinking light green light on the board, I think it means waiting for data? anyone?
Vixen3 sends data even when the sequence is not running. So seeing a TX light on your "breakout board" would appear to be normal.
