Completly lost
 
Notifications
Clear all

Completly lost

7 Posts
6 Users
0 Reactions
2,194 Views
Posts: 425
Topic starter
(@mkess)
Honorable Member
Joined: 19 years ago
[#9316]

Last night we had some bad rain here last night so I didn't run the show just to be on the safe side. I come home today after a long day of sunshine, check and make sure there was no water in any of the enclosures and all looked good. Well I power everything up and notice that there are a couple of channels that have come on as well. Mind you now I haven't even opened vixen yet. So I then open vixen 2.5.08 or whatever the latest is hit test channels and nothing happens. I then open a test sequence and nothing happens. So then I make sure I actually have power and none of my GFI's have tripped. Okay well I did find one GFI tripped, can't it to reset. I then run a normal sequence and nothing. I have my audio working but none of the channels will come on at all. Even the channels I have that are plugged inside won't work. I have power to the board so that is good. Please help me out.


6 Replies
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

I'll get a couple suggestions going... others will chime in too, I'm sure.

Probably the first thing to go in any outdoor electrical system after a rainstorm are physical connections. Obviously something is not talking to something. So you need a logical checklist to follow. And that checklist should follow the electrons. First in terms of electrical power. You may have to use a line tester with this -- or something that allows you to check whether 120vac is going from the plug to the other end of the cables where the action is. A spare set of Christmas lights will work fine.

The electrical starts at the main circuit breaker (not the GFCI, the MAIN power box). Check to make sure the breaker hasn't tripped for that circuit. Then check the next item in line -- does the outlet plug you're using power up a light. Then go on down the line to make sure the electrical power is available where it's supposed to be.

Now do the same with the light control. Probably starts at your computer. What's next in the line? Check it to make sure data at point A is getting to point B. And so on, all the way out to the controller.

Take your time, iron them out one at a time and you'll get it.


Reply
Posts: 425
Topic starter
(@mkess)
Honorable Member
Joined: 19 years ago
dirknerkle wrote:I'll get a couple suggestions going... others will chime in too, I'm sure.

Probably the first thing to go in any outdoor electrical system after a rainstorm are physical connections. Obviously something is not talking to something. So you need a logical checklist to follow. And that checklist should follow the electrons. First in terms of electrical power. You may have to use a line tester with this -- or something that allows you to check whether 120vac is going from the plug to the other end of the cables where the action is. A spare set of Christmas lights will work fine.

The electrical starts at the main circuit breaker (not the GFCI, the MAIN power box). Check to make sure the breaker hasn't tripped for that circuit. Then check the next item in line -- does the outlet plug you're using power up a light. Then go on down the line to make sure the electrical power is available where it's supposed to be.

Now do the same with the light control. Probably starts at your computer. What's next in the line? Check it to make sure data at point A is getting to point B. And so on, all the way out to the controller.

Take your time, iron them out one at a time and you'll get it.

I am at the computer/board area. All my power sources have at least one thing on it that is static so I know if there is power there or not, kind of safe guard so I know when the those items aren't working to start there. Also to I have a couple relays that are inside and they aren't doing anything either. All my LED's on the relays are lit just nothing is happening.


Reply
Posts: 295
(@billad)
Reputable Member
Joined: 19 years ago

mkess,

Is it possible that you have a wet connection on your CAT-5 which is grounding out the signal? If your controller is outside then check the connects - replace the cable between your computer and the first controller if you have a spare cable around. Also if you are using a coupling to connect two lengths of cable together then suspect the connection at this point. Good luck.

Bill


Reply
WakeFan
Posts: 733
(@wakefan)
Prominent Member
Joined: 19 years ago

I would start at the first board hooked up. If it is not working then the rest in the series will not work assuming Renard, Grinch, or Olsen. Not sure of the others.

Maybe try to bypass the first board to see if the rest in line work.


Reply
PacMang
Posts: 241
(@pacmang)
Reputable Member
Joined: 19 years ago

i know you said that your boards were all dry but when my ssrs get wet it causes errors like your describing(couple channels on).


Reply
Elmo2resc
Posts: 265
(@elmo2resc)
Reputable Member
Joined: 19 years ago
PacMang wrote:i know you said that your boards were all dry but when my ssrs get wet it causes errors like your describing(couple channels on).

I have experienced the same thing. Make sure everything is dry. check under the boards if they are mounted to something.


Reply
Share: