I'm not sure if this is a relevant comment about your SoundBlaster 3 but I’m putting it out there for what it is worth. I ran my show off my PC using the Vixen scheduler and using a SoundBlaster with EDM transmitter for the past 2 years. Soundblaster3 worked just fine. I moved to Raspberry Pi 3B+ and FPP this year. Hooked up my Soundblaster3 last night and I had a lot of static coming out of my transmitter. Went back to my PC and Soundblaster3 (same setup as previous years) and got no improvement. Tried another transmitter, same results. I couldn’t even access my Soundblaster3 Control panel on my PC to change my Soundblaster3 configurations. Decided to see if there were any updates for drivers and updated the driver. Tried the Soundblaster3 back on both the PC and FPP and the static had disappeared.
Even though I still can’t access the Soundblaster3 Control Panel on my Windows 10 computer, I’m able to see it in the device manager. Ran sound tests all day today and I’m going live with the show tonight. I never considered that maybe my problem with SoundBlaster 3 operation/sound quality might be related to making sure it had a current driver.
For what’s it’s worth anyway.
I had a similar issue. Had poor sound quality, got a Rocat Juke USB sound adapter. When it was plugged in, lost one of my serial dongles. Pull sound USB, dongle was back. Realized I wasn't using a 2.5A 5V adapter. Swapped adapter from another Pi that was 2.5A, problem solved. All the USB's were adding to the load.
I read in this thread to put the data on the SD card and remove the USB device for storage. Will figure out how to do that tomorrow.
zaker wrote:I had a similar issue. Had poor sound quality, got a Rocat Juke USB sound adapter. When it was plugged in, lost one of my serial dongles. Pull sound USB, dongle was back. Realized I wasn't using a 2.5A 5V adapter. Swapped adapter from another Pi that was 2.5A, problem solved. All the USB's were adding to the load.I read in this thread to put the data on the SD card and remove the USB device for storage. Will figure out how to do that tomorrow.
Yes, the developers have all said that you should *not* be using USB storage as it has caused all sorts of issues. The FPP manual will tell you how to get your stuff configured onto the SD card - hopefully you've got an SD card or two lying around for this. I seem to recall that the Samsung and SanDisk brands, 8 or 16GB, should be plenty large enough.
