Raspberry Pi Connec...
 
Notifications
Clear all

Raspberry Pi Connection Issues

13 Posts
7 Users
0 Reactions
4,724 Views
Posts: 24
Topic starter
(@ebenne)
Eminent Member
Joined: 16 years ago

So I decided to change to run the DMX from the Alhpapix controller instead of using the DMX dongle and all worked perfectly last night.

Now I keep getting the message "Cannot Ping e1.31 Channel Data Target 192.168.107.50" and can only sporadically connect to it...

Audio device currently is just the on board one. I have a sound blaster USB device but was having trouble using that too.

Yes, I believe running the latest version of FPP, just updated all of that on Wednesday.

No USB drive, using the microSD for everything.


Reply
Posts: 24
Topic starter
(@ebenne)
Eminent Member
Joined: 16 years ago

Seems to be any use of audio makes me lose connection to the AlphaPix controller.. Just tried hooking up to a stereo instead of FM transmitter.


Reply
Posts: 24
Topic starter
(@ebenne)
Eminent Member
Joined: 16 years ago

Still having problems but they're getting worse. Constantly losing connection to AlphaPix controller getting the error "Abnormal Conditions - May Cause Poor Performance; Cannot Ping e1.31 Channel Data target 192.168.107.50

It only seems to work when the audio jack is not used. I even used a second Pi to run the audio from there in Master/Slave mode and as soon as the audio cable was connected I lost connection the the pixel controller.

I'm losing my mind and can't figure out what else to try :unsure:'

Anyone ever have anything like this happen?


Reply
Posts: 120
(@superdave)
Estimable Member
Joined: 13 years ago

Have you tried moving all the USB devices to a powered USB hub? It might remove the chance of the USB devices drawing too much power. When the Pi is under load, it might be drawing more power than is available, even if it is fine during idle.

I've heard of people saying that they had problems with the FM transmitter being too close to the Pi. Using a 20ft cable, they were able to get more stability. I'm not sure if there was a lot of RF coming off the transmitters and impacting the Pi or what. Several people have claimed it has solved their problems. It might also be some noise backfeeding across the audio cable? It all seems questionable at this point, but enough people have noticed it to require more investigation.


Reply
Posts: 24
Topic starter
(@ebenne)
Eminent Member
Joined: 16 years ago

I can certainly try all of that. Only USB device currently is the USB to Serial to ethernet for the Renard controllers. Was currently using onboard audio jack (couldn't get soundblaster3 to work either) as well as the ethernet port.

Can also try moving FM transmitter farther away, its currently about 3' away form the Pi.

Is there a way to prevent noise from backfeeding across the audio cable? (different cable, try to get the soundblaster3 to work, etc)

Thank you for your response! I really appreciate it


Reply
Page 2 / 3
Share: