I'm having issues with FP and Raspberry Pi being able to deliver on all of the outputs at once. It seems it can only function when only some are connected. I have the following connected
1. ethernet to E1.31 based controller
2. USB to renard
3. USB to DMX (HolidayCoro ActiDongle V2)
4. Audio Output to FM tansmitter
I'm using a Raspberry Pi 3 B+ and am using a 5V, 2.5A power supply. If I have the audio disconnected, I can get the E1.31, DMX, and Renard signals out (sometimes). If I connect the audio, the DMX loses connection (doesn't show it as an option at tall in FP).
I had this same set up last year with no problems so I'm confused as to why I am getting issues now. Please help 😥
ebenne wrote:I'm having issues with FP and Raspberry Pi being able to deliver on all of the outputs at once. It seems it can only function when only some are connected. I have the following connected1. ethernet to E1.31 based controller
2. USB to renard
3. USB to DMX (HolidayCoro ActiDongle V2)
4. Audio Output to FM tansmitterI'm using a Raspberry Pi 3 B+ and am using a 5V, 2.5A power supply. If I have the audio disconnected, I can get the E1.31, DMX, and Renard signals out (sometimes). If I connect the audio, the DMX loses connection (doesn't show it as an option at tall in FP).
I had this same set up last year with no problems so I'm confused as to why I am getting issues now. Please help 😥
Could you use another pi in remote mode to handle part of the load ?
I run 3 pi’s on same network
Sent from my iPhone using Tapatalk
I suppose I could, would just need to get one quick.
I really don't have that big of a show though (Renard ~168 channels, DMX ~ 30, and about 350 Pixels) and I used the exact same setup last year with no issues
ebenne wrote:I suppose I could, would just need to get one quick.I really don't have that big of a show though (Renard ~168 channels, DMX ~ 30, and about 350 Pixels) and I used the exact same setup last year with no issues
Don’t. Seem like much not sure.
Sent from my iPhone using Tapatalk
Are you running the latest version of FPP...today it is 4.5.1
Also, if you are running storage on a usb drive, you could/should change to have storage on your microSD - faster access ans removes a usb device.
So I decided to change to run the DMX from the Alhpapix controller instead of using the DMX dongle and all worked perfectly last night.
Now I keep getting the message "Cannot Ping e1.31 Channel Data Target 192.168.107.50" and can only sporadically connect to it...
Audio device currently is just the on board one. I have a sound blaster USB device but was having trouble using that too.
Yes, I believe running the latest version of FPP, just updated all of that on Wednesday.
No USB drive, using the microSD for everything.
Seems to be any use of audio makes me lose connection to the AlphaPix controller.. Just tried hooking up to a stereo instead of FM transmitter.
Still having problems but they're getting worse. Constantly losing connection to AlphaPix controller getting the error "Abnormal Conditions - May Cause Poor Performance; Cannot Ping e1.31 Channel Data target 192.168.107.50
It only seems to work when the audio jack is not used. I even used a second Pi to run the audio from there in Master/Slave mode and as soon as the audio cable was connected I lost connection the the pixel controller.
I'm losing my mind and can't figure out what else to try :unsure:'
Anyone ever have anything like this happen?
Have you tried moving all the USB devices to a powered USB hub? It might remove the chance of the USB devices drawing too much power. When the Pi is under load, it might be drawing more power than is available, even if it is fine during idle.
I've heard of people saying that they had problems with the FM transmitter being too close to the Pi. Using a 20ft cable, they were able to get more stability. I'm not sure if there was a lot of RF coming off the transmitters and impacting the Pi or what. Several people have claimed it has solved their problems. It might also be some noise backfeeding across the audio cable? It all seems questionable at this point, but enough people have noticed it to require more investigation.
I can certainly try all of that. Only USB device currently is the USB to Serial to ethernet for the Renard controllers. Was currently using onboard audio jack (couldn't get soundblaster3 to work either) as well as the ethernet port.
Can also try moving FM transmitter farther away, its currently about 3' away form the Pi.
Is there a way to prevent noise from backfeeding across the audio cable? (different cable, try to get the soundblaster3 to work, etc)
Thank you for your response! I really appreciate it
