E1.31 Protocol Disc...
 
Notifications
Clear all

E1.31 Protocol Discussions

63 Posts
18 Users
0 Reactions
37.3 K Views
Posts: 54
(@nomis52)
Trusted Member
Joined: 17 years ago
mrpackethead wrote:I've got two Guru-plugs and yes they have problems if you plug them into Gigabit networks, if you run them at 100MB they seem fine.. Had one running for 4 weeks no problems.

I've had the same issue when using GigE networks and to be fair they've offered to replace the unit for me.

I agree with the comments about the software on the plug being sub-standard. It feels like the software image was hacked together in a couple of days (config & init scripts in /root etc.), but that can all be fixed.


Reply
Posts: 311
(@neilric99)
Reputable Member
Joined: 17 years ago
nomis52 wrote:If you want something that works now: http://opendmx.net/index.php/OLAGuruPlug

It's slightly more expensive hardware, but it's a *supported* config.

As a random note, it's looks likely that these devices will be at LDI in Vegas this year as part of the RDM/ACN connectivity pavilion.

Simon

I am going to LDI this year and will be most interested in the DIY side as well as looking at the LED matrix tools.


Reply
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago
neilric99 wrote:I am going to LDI this year and will be most interested in the DIY side as well as looking at the LED matrix tools.

LDI is not really geared toward the DIY side. Its really an opportunity for theatrical and concert lighting manufacturers to show off their new and existing products.


Reply
Posts: 311
(@neilric99)
Reputable Member
Joined: 17 years ago
DynamoBen wrote:LDI is not really geared toward the DIY side. Its really an opportunity for theatrical and concert lighting manufacturers to show off their new and existing products.

yes and thats also what I will be going to see and attend the LDI conference sessions to catch up with the latest technology.


Reply
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago
neilric99 wrote:yes and thats also what I will be going to see and attend the LDI conference sessions to catch up with the latest technology.

Fair enough then you are going to the right place. 😉 BTW stop by the ETC booth and check out EOS, I had a hand in its creation.


Reply
dgirard
Posts: 337
(@dgirard)
Reputable Member
Joined: 17 years ago

I got excited about the ESX comment below...I thought about it myself a few days ago...the only problem...sound...

I've seen some Ethernet->USB converters with which I could use a USB audio adapter (envision--my FM broacaster with a network port on the front instead of audio-in!)....ethernet to FM!

the only problem is I've yet to find a "cheap" one...

aususer wrote:"seek and ye shall find" thanks for the links.
Might have to see how far I go with gcc for a software-based E1.31/Reynard gateway (to allow me to "retro-fit" my current environment) before I drown 🙂

Re: your $29 hub - I take your point, but considering I can buy an 8port TPLINK with 802.3q for $AU170 its not something that should be discredit out of reach.
I conceed that I haven't seen how much data we are talking about yet.. threads I read put it at ~260Kbs for 1 DMX512 universe (??) @ 10,000channels that would be ~5.2Mbs of raw..

E1.31 does tick a LOT of boxes for me (ie. I run ESXi - and usb/serial is a no-no.. thus I have to have a dedicated show PC :()
it also gives me some project ideas too:
eg. I just threw out old laptops that could have been software-hacked into 22x22 (1universe) "pixel" display (ie. like ledtrix - just using LCDDisplayed-pixels not LEDS).
Put 9 screens in a matrix (I just threw out 9)... 9 dmx universes - wack them all into a waterproof, perspex case.. Run lightshowpro transforms or Madrix..
Not a LED in sight.
you get the idea..and all very do'able by DIYrs.. (old notebooks are e-waste to most companies).

I do have a qustion regarding the E1.31...
Can you have more than one initiator throwing signals out?
I'm looking at ways I could intigrate "kick/stamp pads" into this - and if I can inject E1.31 data from anywhere - I can make a display interactive.


Reply
Posts: 448
(@bobkeyes)
Honorable Member
Joined: 17 years ago

Has anyone heard from Ed lately? I've email, called, etc. NO GO!

Ausiephil--Have you heard from him? Is he OK?


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago
bobkeyes wrote:Has anyone heard from Ed lately? I've email, called, etc. NO GO!

Ausiephil--Have you heard from him? Is he OK?

He's been posting on Phil's site - sounds like he's been ultra busy putting new goodies out...


Reply
Posts: 1249
(@jstjohnz)
Noble Member
Joined: 17 years ago

I am working on being able to receive E1.31 using a WIZ 812 ethernet module. As I get into this a bit deeper, a lot of questions are popping up.

What is presently available as far as software that will transmit E1.31, to use for debugging?

Typically, is a E1.31 transmitter configurable as to unicast or multicast, or both? What is the most common setup?

It would seem as though multicast would be the easiest plug and play.

So if I am a E1.31 receiver I need to look for packets from 239.255.x.x with destination port of 5568, correct?

I guess where I'm not clear is how to configure the WIZ module to look for UDP packets from 239.255.x.x. The packet structure itself looks pretty straightforward.


Reply
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago
jstjohnz wrote:
What is presently available as far as software that will transmit E1.31, to use for debugging?

Vixen is can do it, there is also a sticky that has a tool that will stream E1.31.
http://doityourselfchristmas.com/forums/showthread.php?t=184

Typically, is a E1.31 transmitter configurable as to unicast or multicast, or both? What is the most common setup?

Most devices I've used are multicast.

So if I am a E1.31 receiver I need to look for packets from 239.255.x.x with destination port of 5568, correct?

Correct, the multicast address lets you know which universe you are listening to.

I guess where I'm not clear is how to configure the WIZ module to look for UDP packets from 239.255.x.x. The packet structure itself looks pretty straightforward.

ftp://ftp.efo.ru/pub/wiznet/W5100_HowtoMulticasting_En_v1.0.pdf


Reply
Page 3 / 7
Share: