E1.31 Protocol Disc...
 
Notifications
Clear all

E1.31 Protocol Discussions

63 Posts
18 Users
0 Reactions
37.3 K Views
Posts: 1249
(@jstjohnz)
Noble Member
Joined: 17 years ago

Thanks for the link to that pdf, haven't read it yet but it sounds like exactly what I need. After posting above I found a tool called SACNLINK that seems to be perfect for testing.


Reply
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago
jstjohnz wrote:....SACNLINK that seems to be perfect for testing.

That could work too, I downloaded that the other day but didn't spend much time with it.


Reply
Posts: 54
(@nomis52)
Trusted Member
Joined: 17 years ago
jstjohnz wrote:
What is presently available as far as software that will transmit E1.31, to use for debugging?

Typically, is a E1.31 transmitter configurable as to unicast or multicast, or both? What is the most common setup?

A list of E1.31 software is here: http://opendmx.net/index.php/Category:E1.31

Simon


Reply
Posts: 13
(@mickpat)
Eminent Member
Joined: 16 years ago

Hello Ed,

Do you have an sample C# project you could share or an example of how to call the class? Thanks.

Michael


Reply
Posts: 13
(@mickpat)
Eminent Member
Joined: 16 years ago
Mickpat wrote:Hello Ed,

Do you have an sample C# project you could share or an example of how to call the class? Thanks.

Michael

I found the Vixen plug-in which is exactly what I needed.


Reply
Posts: 136
Topic starter
(@j1sys)
Estimable Member
Joined: 17 years ago
Mickpat wrote:I found the Vixen plug-in which is exactly what I needed.

that was what i was coming in to reply ....

only thing i've ever used it in. source was also provided to several software vendors. don't know how much they changed in their releases.

-Ed


Reply
cenote
Posts: 350
(@cenote)
Reputable Member
Joined: 19 years ago

Quick question, can you hook up the E1.31 to DMX bridge directly to your network card on your pc, or do you need to hook to your router? Just wondering, if my show computer needs to be hooked to my network, or run independently for show.
Thanks


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago
cenote wrote:Quick question, can you hook up the E1.31 to DMX bridge directly to your network card on your pc, or do you need to hook to your router? Just wondering, if my show computer needs to be hooked to my network, or run independently for show.
Thanks

Either is fine - directly to PC or via a switch port.


Reply
Matt_Edwards
Posts: 2664
(@matt-edwards)
Famed Member
Joined: 18 years ago
cenote wrote:Quick question, can you hook up the E1.31 to DMX bridge directly to your network card on your pc, or do you need to hook to your router? Just wondering, if my show computer needs to be hooked to my network, or run independently for show.
Thanks

Yes. Straight or cross over cable should work. My E31.1 network is on a different subnet to my home network, but also has physical separation. The show PC also has a Wireless Lan for connection to the home network.


Reply
cenote
Posts: 350
(@cenote)
Reputable Member
Joined: 19 years ago

Thanks, hoping for that answer.
Chuck


Reply
Page 4 / 7
Share: