WS2801 controllers
 
Notifications
Clear all

WS2801 controllers

36 Posts
14 Users
0 Reactions
31.5 K Views
Matt_Edwards
Posts: 2664
Topic starter
(@matt-edwards)
Famed Member
Joined: 18 years ago
[#11780]

These chips are used in the commercial Pixels. They offer 3 channels of 8bit PMW with programmable constant current source. At a street price of 20cent each they are also damn good value.
I am thinking of a small remote controller

Basic Spec:
3ch
30mA Constant Current
12 to 24v operation OR
5V only

Parts cost are around 3.00 in PWB but exc the 24 to 5 SMPS. I haven't decided on the PS yet. AND you will need a DMX 2 SPI Bridge with RS422 driver capability.

So any thoughts?


35 Replies
Posts: 597
(@entropy)
Honorable Member
Joined: 19 years ago

Got a datasheet by any chance? What's your source? (Since you're in AUS, the feasibility of these might not be so great in the USA where they are VERY difficult to source.)


Reply
Posts: 1041
(@n1ist)
Noble Member
Joined: 19 years ago
Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Interesting idea. There seems to be no end to the wonderful creativity of our good friends down under! Those of us up here in the "brain-freeze tundra" will be watching your progress as development continues!

-dave


Reply
Matt_Edwards
Posts: 2664
Topic starter
(@matt-edwards)
Famed Member
Joined: 18 years ago

n1ist - that is the data sheet - thanks
source is for the chips is Alibaba.com
All the pricing below is based on 100 off units.

if it is not clear, the RS422 chips are only used to increase cable length between chips. most applications have them about 15 to 20cm apart.
I am thinking more than 100cm.

The 30mA limitation sort of determines there application - a singe string of LEDs. if you want more I suspect you would be better using an small AVR tiny or even a FPGA with a fet and constant Curent source.


Reply
Page 1 / 8
Share: