James,
It looks like a Ren16 driving 16 separate Strobe Pucks. Each Strobe puck has 20 LEDs.
Never belittle being a newby - the more you ask the more you. One thing that is great here is the lack of politics, the lack egos and most don't suffer from Peter Principle - you know the disciple that kept putting his foot in his mouth. enjoy.
the video is cool. it lookslike both sets of leds are rotating in the same direction
Matt_Edwards wrote:the video is cool. it lookslike both sets of leds are rotating in the same direction
It does kinda look like there are rotating in the same direction when viewed in the video, but when you look at it with the naked eye it looks like are going in the same direction then they will alternate then rotate in the other direction which I think it is due to the 2 clock sources are not synced together.
JamesL85 wrote:OK.....My "noob-ness" is going to show through here.I think the original post said that this was a simple Renard 16 channel thing. Does this mean that it will take 16 channels, or can you assign it 1 channel and it strobes randomly through the 16 channels available to it? Sorry for my ignorance, I'm still pretty new here and am 250% ignorant, possibly more.
So were saying a simple 16 board would run 16 of these strobe bursts??? Also curious of the price in making these bursts. Being new here as well ..... How are they powered???
I like the strobe effect... and am curious of the cost difference between these and others.. Thanks guys
DaveJZ wrote:So were saying a simple 16 board would run 16 of these strobe bursts??? Also curious of the price in making these bursts. Being new here as well ..... How are they powered???I like the strobe effect... and am curious of the cost difference between these and others.. Thanks guys
Well a Simple 16 will not work for this because of the pinouts on the RJ45 connectors are different,, the concept is the same as the Simple 16 and it will function like a Simple 16 but that is about as far as it goes because you need a V+ power line to each Strobe Module,, as for the price of each module we are still unsure how much they will cost,, I am thinking between $7 and $10 a piece but we are still trying to get the PCB for the module as small as we can first before we can make that call, We will know more on pricing in about a week.
So let me see if I have this right... Please correct me if I'm wrong (which is likely)
With these strobe bursts built I would add channels to vixen and sync when I want the burst to turn on. With those channels I could control the bursts. I would have 2 main parts, the controller and the burst. The controller would control up to 16 bursts.
Now the questions:
Is power supplied through the controller board, and can these be daisy chained to other ren boards?
Sorry for the questions but I'm really interested in this. I like the effect that strobes give displays and looking for a lower cost strobe effect to add to my mega tree. Any information is appreciated
Have you looked into sizing the "pucks" so they would fit in the new KFC reusable individual size side containers? waterproof and free if you eat at KFC. The top is red but the container is clear and seems like it would be about the right size...
To CaptKirk
No I haven't looked into the KFC reusable individual size side containers,, I guess I'll have to check them out...:)
To DaveJZ
As for your question, Is power supplied through the controller board, and can these be daisy chained to other Renard boards? The main controller is fed by a 12 power supply which feeds all the modules and yes you can connect other Renard Controllers is series with with the Strobe controller,, even go wireless if you like.. I have included a block diagram so you can have a better understanding on how to connect them.
This is a really neat project... I look forward to seeing more on it, and hopefully adding strobes to my display!!
Mactayl wrote:Well a Simple 16 will not work for this because of the pinouts on the RJ45 connectors are different,, the concept is the same as the Simple 16 and it will function like a Simple 16 but that is about as far as it goes because you need a V+ power line to each Strobe Module,, as for the price of each module we are still unsure how much they will cost,, I am thinking between $7 and $10 a piece but we are still trying to get the PCB for the module as small as we can first before we can make that call, We will know more on pricing in about a week.
Mac,
These ( http://www.bcwsupplies.com/products/Golf-Ball-Display-Cases/Golf-Ball-Square.htm ) may work for your burst module.
- Holds a regulation sized golf ball
- Crystal clear
- 2 piece design
Dimensions
- Exterior 2 1/4 x 2 1/4 x 2 1/4
- Interior 2 3/16 x 2 3/16 x 2 3/16
Tony
