Well here we go again,, Tyler and I kinda came up with another idea for the Simple Renard's. It will be called the Simple Renard Strobe Burst. It consists of a 16 channel controller that can control up to 16 Strobe Burst modules which can be controlled by Vixen and they are also dimmable. The module is free running all the time that there is power to the module and the LED outputs are controlled by the controller which can be turned on/off or dimmed anytime during your sequence, normally they are off. Each module consists of twenty 5mm superbrite LEDs and components to control them. We are also working on a small clear enclosure for each module,, something like a Petri Dish. I have include a couple of PDF's for your thoughts. I will make a short video this week on how they work..Thanks again from the Dungeon of Dr. Franken Simple
Sounds cool, looking forward to seeing the video.
Erik
I have added code for testing to the first post if anyone wants to give it a go, it is pretty much the same code used on the Simple Renard 16 except it is setup for LED's. 🙂
Great idea. Hope to see the video soon. Now if I can just figure out how to make the LED's in a ball format, it would work great for what I want to do.
Thanks for the PDF's.
I made a similar gizmo last year -- they were LED strobes but powered with 24vac. Worked out slick -- The little screw-top boxes come in many sizes, and you might find the boxes you need at widget supply. http://www.widgetsupply.com/
Here's a link to the thread I started last year about them --
http://doityourselfchristmas.com/forums/showthread.php?12021-A-C-Led-Strobes&p=121695#post121695
