Simple Renard 32
 
Notifications
Clear all

Simple Renard 32

103 Posts
25 Users
0 Reactions
56.1 K Views
Mactayl
Posts: 2491
Guest
Topic starter
(@mactayl)
Famed Member
Joined: 17 years ago

Nice job on the Home Etch:thup2:


Reply
glaforce
Posts: 414
(@glaforce)
Honorable Member
Joined: 17 years ago

Ok i have been reading thru the thread and cant say i'm 100% sure i know what the baud rate is i see 57.6 and 115.2. I have read thru the code and dont see where to change it. So needs some input as Johny 5 would say.

Gary


Reply
Reddy_Kilowatt
Posts: 547
(@reddy-kilowatt)
Honorable Member
Joined: 19 years ago

The default is 57.6k. You can customize the firmware by editing the xxx.inc file.:cool2:

;;  NOTE:
;;
;;  This firmware is configured for PWM use with 57600 baud communications.
;;  Here are the DEFINE statements for changing this.
;;
;;  User tunable items:
;; define baud rates. uncomment one of the following options
;; #define BAUDRATE 38400  ;; not tested on 32 Channels
 #define BAUDRATE 57600
;; #define BAUDRATE 115200

How times fun when your having flies....

-Craig


Reply
Mactayl
Posts: 2491
Guest
Topic starter
(@mactayl)
Famed Member
Joined: 17 years ago
glaforce wrote:Ok i have been reading thru the thread and cant say i'm 100% sure i know what the baud rate is i see 57.6 and 115.2. I have read thru the code and dont see where to change it. So needs some input as Johny 5 would say.

Gary

Hi Gary,

Not sure if you are wanting to use 57.k baud,,, if so here is a hex file for a PIC18F4620 at 57.6K baud,, if you would like the MPLAB project file or a hex file for 115.2k drop me a PM..


Reply
Posts: 859
(@smartalec)
Prominent Member
Joined: 17 years ago
Mactayl wrote:We will be looking into DMX soon but I am not sure if it can be done with 32 channels. I hope to have an answer soon.

Any update with the DMX ?
thanks


Reply
Page 17 / 21
Share: