If I can just pipe in a bit and say hot air reflow is fine for double sided without glue. Hot Air Reflow guns are still pretty cheap.
I too made RGB type light and they are double sided SMT in 2x5 panels.
photos are here/.
I am yet to try my reflow oven as it is still being built.
SMD work is not for everyone. however, I would have no issue helping out my neighbours. Like blokey knighting classes, come on over and have a beer (YUK!) while we heat some stuffed boards.
Cheers
Matt
AAAAH, now I remember the other person who was doing RGB pixel work, it was you! 🙂
P. Short wrote:The kicker, of course, is the amount of labor required for such a thing. I'm figuring about 25 SMT solder joints per pixel. This comes to a huge amount of work...and the difficulties that people are likely to encounter in replicating this design is one reason why I haven't been considering making the design public. It seems to me that others are going to run into this same problem, unless they have the boards assembled by some commercial company...which sort of takes it out of the realm of DIY.
Would it be worth considering having just the boards pre-built, without an LED or wires, and then people are free to choose whatever LEDs they want and could use these as "components" by potting or heatshrink tubing or however they want to use them? Then it would still be somewhat DIYC, but just the tricky SMT part of it would be taken care of.
don
P. Short wrote:... that's something to play with when my wife isn't around.
If you can keep to a singlesided board with soldermasks.. essentially, make a solderpaste mask; cover the mask with solderpaste; remove the mask; apply your components; heat to melt..
http://www.instructables.com/id/Extreme_Surface_Mount_Soldering/
find a hotplate bigenough - and you get your boards made in one big board - and do "bulk soldering".
aususer wrote:If you can keep to a singlesided board with soldermasks.. essentially, make a solderpaste mask; cover the mask with solderpaste; remove the mask; apply your components; heat to melt..
...and salt and pepper to taste...:rolleyes:
