RGB LED Project...
 
Notifications
Clear all

RGB LED Project...

12 Posts
8 Users
0 Reactions
7,150 Views
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 19 years ago
[#10067]

The thread by Entropy in this forum has pushed me to spend a little bit of time re-visiting the RGB pixel design that I created a while back. I've written about it a little bit in some of the messages in this thread, but it bears a general resemblance to the voxels described in the cubatron link provided in the "How does he Do it" thread in the Lounge forum. I've found some 5mm RGB LEDs on Ebay for $0.17 (qty 100, although I'm uncertain about the quality), the PICs are $0.34 (qty 100), and it's possible to get a 0.5"x0.5" PCB for around $0.13 (qty 1000). After adding in enclosures (potting compound), wire and so forth the cost of a 100-count string should come in around $100, which is why I've been pushing for that cost target.

The kicker, of course, is the amount of labor required for such a thing. I'm figuring about 25 SMT solder joints per pixel. This comes to a huge amount of work...and the difficulties that people are likely to encounter in replicating this design is one reason why I haven't been considering making the design public. It seems to me that others are going to run into this same problem, unless they have the boards assembled by some commercial company...which sort of takes it out of the realm of DIY.

Edit...moved this message to it's own thread to avoid hi-jacking Entropy's thread.


11 Replies
Posts: 597
(@entropy)
Honorable Member
Joined: 19 years ago

Just curious about your LED source - diffused or clear?

Topbright's 5mms are about $0.35 in Qty 100, I haven't looked particularly hard elsewhere because Topbright has been around quite a while and has a HUGE store.

My current cost estimates assume higher prices for the LEDs - $0.42-0.45 (depending on size) from EMSL, who is US-based.

As to soldering, for the SMT stuff - panelized on skillet might work? (Edit: Obviously not for the LEDs themselves, but possibly the rest)


Reply
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 19 years ago

Probably clear, I just looked at the price and mcd numbers and moved on.

The difficulty with panelized-on-skillet is that the current design has smd parts on both sides, although the parts could/should be glued on. So far I haven't used the skillet method, so that's something to play with when my wife isn't around.


Reply
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago
P. Short wrote:So far I haven't used the skillet method, so that's something to play with when my wife isn't around.

I too haven't tried it but may very well need to since a lot of the parts I'm interested in are surface mount these days.

I believe SparkFun electronics was using the skillet method for their production boards for a while. They made a nice tutorial about it:

http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=59
Scroll down to "Hot Plate Reflowing"


Reply
Posts: 597
(@entropy)
Honorable Member
Joined: 19 years ago
P. Short wrote:Probably clear, I just looked at the price and mcd numbers and moved on.

The difficulty with panelized-on-skillet is that the current design has smd parts on both sides, although the parts could/should be glued on. So far I haven't used the skillet method, so that's something to play with when my wife isn't around.

Ah, double-sided SMD makes it a lot harder.


Reply
Page 1 / 3
Share: