Renard Plus RGB+W
 
Notifications
Clear all

Renard Plus RGB+W

8 Posts
5 Users
0 Reactions
4,108 Views
Mactayl
Posts: 2491
Guest
Topic starter
(@mactayl)
Member
Joined: 17 years ago
[#24404]

Hi All,

After all the current SR RGB+W boards are gone we may go another direction with the PCB by splitting it into four 8 AMP Banks that will handle 1 AMP continuous per channel using a different transistor (TO-226) then the current PN2222AG (TO-92) being used on each of the output channels. This is just a rough draft and the layout is subject to change, as always any thoughts are welcome.

Thanks
Mac

Renard Plus RGB+W 02072013

7 Replies
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

Why? What is the thought behind these changes?

Brian


Reply
Mactayl
Posts: 2491
Guest
Topic starter
(@mactayl)
Member
Joined: 17 years ago
Skunberg wrote:Why? What is the thought behind these changes?

Brian

It would be double the present continuous current capabilities and it also has on-board fuses.


Reply
Posts: 629
(@dkulp)
Honorable Member
Joined: 14 years ago

If you had one of these available today, I'd buy it. 🙂

Seriously, I have something I'm working on right now that needs about 650ma at 24v that I'm trying to figure out how to control. Was kind of looking at using a DCSSR, but would prefer something like this.

I only have one channel with current that high. The rest would be under 100ma. Do you know if the current RGB+W boards, if I flipped out the transitor to the newer one for just a single channel, could it handle it? Probably not. Don't really want extra smoke effects in the show. 🙂


Reply
Mactayl
Posts: 2491
Guest
Topic starter
(@mactayl)
Member
Joined: 17 years ago
dkulp wrote:If you had one of these available today, I'd buy it. 🙂

Seriously, I have something I'm working on right now that needs about 650ma at 24v that I'm trying to figure out how to control. Was kind of looking at using a DCSSR, but would prefer something like this.

I only have one channel with current that high. The rest would be under 100ma. Do you know if the current RGB+W boards, if I flipped out the transitor to the newer one for just a single channel, could it handle it? Probably not. Don't really want extra smoke effects in the show. 🙂

You can give it a shot, the one I am considering is a TN6717A and it should be a drop in replacement for the PN2222. Here is the data sheet. I am waiting for samples now to do some testing so there is no guarantee it will work..


Reply
Mactayl
Posts: 2491
Guest
Topic starter
(@mactayl)
Member
Joined: 17 years ago
dkulp wrote:If you had one of these available today, I'd buy it. 🙂

Seriously, I have something I'm working on right now that needs about 650ma at 24v that I'm trying to figure out how to control. Was kind of looking at using a DCSSR, but would prefer something like this.

I only have one channel with current that high. The rest would be under 100ma. Do you know if the current RGB+W boards, if I flipped out the transitor to the newer one for just a single channel, could it handle it? Probably not. Don't really want extra smoke effects in the show. 🙂

Also I am pretty sure the traces on the current SR RGB+W should be able to handle at least 1 AMP of current if you were to use the TN6717A transistor but I would not use more then a couple of them on each bank of power.


Reply
Posts: 87
(@brianmiller)
Estimable Member
Joined: 17 years ago

Is this board available? I can't seem to find purchase links for the PCB. 🙁

5 years running on 6xRenardSS24 boards, love em and ready for full RGB 🙂


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

I believe it is still available. You can always check the RP store:

http://renard-plus.com/renardplusrgbw.html


Reply
Share: