I'm looking for PCB mount IDC connectors similar to the 110 punchdown terminals you'd find on the back of a RJ45 keystone jack. I've been doing some searching on mouser and digikey, but not coming up with much. Perhaps i'm just searching the wrong keywords. Anyone have any leads for me to chase?
What i want to create is a quick splice for pixel strings. I'm envisioning two of these 4 position connectors on a tiny PCB simply bussed together. I'm looking at this as a temporary repair for cold/wet weather situations where i just want to go out and quickly splice in a new pixel in place of a failed one. There's been too many times where it's just too cold and/or wet to go outside with a soldering iron and heat gun to properly solder and shrink splices. It'd be great to just punch down a splice, and tape it to get by until a more proper repair can be done.
If you have a competely different solution to my problem i'd love to hear that as well.
http://www.allelectronics.com/make-a-store/item/CON-023/2-WIRE-TELECOM-SPLICE-30/PKG/1.html These are nice because the gel prevent corrosion.
I would like to know how to find though as well though.
Is this what you are looking for?
http://www.jaycar.com.au/productResults.asp?MID=1&SSUBID=769&SUBCATID=991&keyform=CAT2
That's exactly what i had in mind, but i was hoping to find it from one of the US distributors.
jchuchla wrote:That's exactly what i had in mind, but i was hoping to find it from one of the US distributors.
Here is one http://belfuse.com/Data/UploadedFiles/SS-51-PDBlock.pdf
They are in the US so give them a call and find out where to get them.
Perfect. I'll have to call and find out. And now I have a part number to google too. Thanks.
Did you make any progress on this? I'm also after some of the SS-51's but finding them seems to be impossible, unless you wanted a 15 week elad time.
I did not. I called a few places and nobody stocked them. So I have up on the idea for the time being.
--Jon Chuchla--
Sent from my iPhone using Tapatalk
