PCB manufacturer re...
 
Notifications
Clear all

PCB manufacturer recommendations

15 Posts
11 Users
0 Reactions
6,611 Views
Posts: 19
Topic starter
(@umodjm)
Eminent Member
Joined: 17 years ago
[#24550]

Looking for recommendations on PCB manufacturing. I have been using ExpressPCB but the cost of the boards is a bit too high. I think I'm going to switch to Eagle PCB soon, so I can use any PCB maker that accepts gerber files. To those of you who have designed PCBs in the past, who is a good yet cheap manufacturer?

Thanks!

Dennis


14 Replies
Posts: 1041
(@n1ist)
Noble Member
Joined: 19 years ago

I use Itead Studio; good prices but it does take about two weeks to receive the boards. Seeed Studio supposedly uses the same fab as Itead. For one or two boards, OSHPark (previously DorkbotPDX) also has some good deals.
/mike


Reply
Posts: 19
Topic starter
(@umodjm)
Eminent Member
Joined: 17 years ago

What do you use for design software? I didn't see any software packages on Itead's site. Thanks for the info!!


Reply
Posts: 1041
(@n1ist)
Noble Member
Joined: 19 years ago

I use KiCAD at home and PADS at work; I have made boards at Itead with both of them. They just need regular Gerbers. I'm sure Eagle's Gerbers will be fine.

/mike


Reply
ebrady
Posts: 670
(@ebrady)
Prominent Member
Joined: 17 years ago
umodjm wrote:What do you use for design software? I didn't see any software packages on Itead's site. Thanks for the info!!

+1 on Itead and Seeed, both use the same fab house, and I have placed many orders with Seeed and never had a problem.

For design software, I can make two recommendations

Eagle - Most widely used by hobbyist, however the free version is very limited in regards to the size of the PCB you can layout. I have used it for the last 3 years.

KiCad - I am switching over to KiCad for new designs starting this year. There is a windows version, and I find the user interface much more intuitive than Eagle. Considering that it is free, and does not have the imposed size limitations, I beginning to wonder how Eagle managed to become more popular to the hobbyist.

My 2 cents


Reply
RobG
Posts: 1255
 RobG
(@robg)
Noble Member
Joined: 14 years ago

Let's not forget about the Elecrow.


Reply
Posts: 238
(@ronp5683)
Reputable Member
Joined: 14 years ago

I have used MyroPCB or PCBCART. I have a four layer board I am working on. I also would be interested in a less expensive board house. I know that there are places that take individual designs and place them on one panel. The wait time is long, but the prices are very economical.


Reply
Posts: 2171
(@mschell)
Noble Member
Joined: 18 years ago

I've used Eagle, and sent Gerbers to Seeed and OSHPark.

Seeed had some issues last year, and had to retool their production department, but they eventually shipped my order after a month or so. Haven't used them since last fall, but their performance was usually good and fairly short on lead times - 2 weeks from sending in design to showing up on my doorstep.

OSHPark did good, a little longer, but reasonable for a few prototypes. I'd use them again.


Reply
mrpackethead
Posts: 2289
(@mrpackethead)
Famed Member
Joined: 19 years ago

GoldenPhoenixPCB and Silver Circuits. ( China and Maylasia ).. pricing is online.. Silver Circuits is a little more expensive, but they are great to deal with and can cope with anything and are very through with DRC checking and have saved me a lot of hassles sometimes.


Reply
Posts: 2168
(@djulien)
Noble Member
Joined: 19 years ago
umodjm wrote:I have been using ExpressPCB but the cost of the boards is a bit too high. I think I'm going to switch to Eagle PCB soon, so I can use any PCB maker that accepts gerber files. To those of you who have designed PCBs in the past, who is a good yet cheap manufacturer?

Another option is to continue using ExpressPCB and just generate Gerbers from that (rather than learning to use a new CAD package, unless you wanted to anyway). To generate Gerbers from ExpressPCB, you just print to PDFs and then run those thru Pdf2Gerb. Pdf2Gerb may not handle eveything, but it seems to work pretty well on simpler PCBs.

don


Reply
Page 1 / 2
Share: