I have unlocked this thread in the hope that further messages will all be of a technical nature, without any rancor, whining or snarkiness. If this hope proves false, this thread will be locked again or other measures taken.
Another option would be a CPLD to handle the logic items.
Using discrete DIP logic is going to drive up your PCB real estate requirements (and hence cost) quite a bit, especially when trying to route 8 lines to 8 chips.
I/O routing and requirements become a lot easier when you use a bunch of 595s, however bit banging data to these out of a parallel port fast enough and reliably enough gets difficult.
Come to think of it (after reading reddy's post), using nine HCT259 chips (or CD4099, for that matter) would be a more compact design than using '374/'574 parts. Eight of the parts hold the latched data, the ninth would be used as a 3:8 decoder, so that all of the parts are the same.
