Parallel64
 
Notifications
Clear all

Parallel64

18 Posts
10 Users
0 Reactions
7,706 Views
Mactayl
Posts: 2491
Guest
(@mactayl)
Member
Joined: 17 years ago
Reddy_Kilowatt wrote:First, I don't think this belongs in the Vixen forum.

But it could be done with a good parallel port. Maybe you can adapt it to run with Vixen.

I dug up some stuff that I hadn't seen in a while... Pardon my dust..:razz:

In the late 80's, I wanted to animate some Christmas lights using an old Commodore 64's user port. The first design I had, used 4 of 16 decoders with a flip flop wired as a toggle, driving the output. The idea was to address the output once to turn it on, then address (poke) it again to turn it off.

The second design, used 3 of 8 decoders and 74LS259 addressable latches. I couldn't find the schematic. It's around here.. someplace..;-)

Almost finished, 128 channel board using 259's:

Just about as much fun as an old fashioned Ledtriks. 🙄

I ran my first blinky-flashy using an experimenters breadboard. The thought of setting it to (Sid ?) music never occurred to me at the time.

-Craig

Man does that stuff bring back the old days.....:shock:


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

I did a similar thing with an Apple II+ using the joystick port, but of course it was nowhere near as exotic nor did it have as many channels. I did have it synchronized to music however, using the internal Apple tone generator and simple Christmas melodies, but the tone was so monotonous and grating on my nerves, I took it out.

Ahhhh.... those were the days.... (sigh...)


Reply
Posts: 48
 Ray
Topic starter
(@ray)
Trusted Member
Joined: 16 years ago
Wayne J wrote:The tone of this post is not very friendly (I actually read it as very rude). Try to play nice. 😉

I can't help what you find as rude.
I don't see anywhere that I was critical of people.
I see a lot of people getting uptight and so I turn it to humor.

By the way I don't mind people that give good advice. What I use humor on his
people who are NOT there to give advice. But rather (whatever they want to call it)
are there to putdown others. So I use humor on them.

I have indicated at least a dozen times what I am interested in and yet people still come and give putdowns. "you don't understand" or "you are not aware" etc. and call it "due diligence or whatever".

Do people really think, after you've noted it a dozen times, that you don't know parallel is old?

I tried the "diligence" of these forum members on my neighbor. He was tinkering with his old Model T so I came to him "Model T's are dead." "They haven't made a model T in over 80 years" "Don't you know that no detroit engineer would make a car like that again." etc etc etc. At first he wanted to get the shotgun out but then, since he knows me, he burst into laughter.

If you see someone working on a model T and you come up to him with those types of comments. Especially after someone has pointed out (repeatedly) that they are just working on these old cars for fun. Then you wonder if they are just joking or are they somehow, in some weird way, seriously thinking you don't know that nobody makes a model T anymore. So the best way to respond is with humor.

You accuse my fun of being rude. Well I could accuse all these people of being rude too. But I don't. I assume they are just having fun with a newcomer and so I joke back too. That's being friendly not unfriendly.

Seems you are the one who doesn't know that. If you think that's unfriendly then that's your problem. Try to laugh when people rib you. I rib back when people rib me. Nothing unfriendly about it.


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago

Try to work on the attitude you are using here.


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 19 years ago

Even though this thread is locked, I will try to ignore all of the subsequent exchanges and reply to the first message...

If I were attempting to do a parallel64, I would tend to use eight 74HCT374 (or '574') chips connected to the data lines, and then a single LS138 connected to the parallel port control lines. Of the four control lines, three would go to the output selection lines, and the fourth one would go to one of the '138 enable lines.

The other scheme (using 4:16 decoders on the data lines) would be more complex, I think. If I understand correctly how you want to use the 4:16 decoders, it would be similar to the Hill-320 design, and you would need some sort of latch on the inputs to the decoder. On the other hand, I'm not sure at all that I understood what you were trying to say when you mentioned this approach.


Reply
Page 3 / 4
Share: