New project: Sawyer...
 
Notifications
Clear all

New project: Sawyer Star (LED array)

54 Posts
13 Users
0 Reactions
33.2 K Views
dmcole
Posts: 2196
Topic starter
(@dmcole)
Noble Member
Joined: 19 years ago
theoldgeezer wrote:I can't tell a diode from a lawnmower but did you try removing the bread from the board first?

Damn! That's it. Still, going to take me three-to-five days to get all that bread out, clean it up, let it dry, etc.

Stay tuned.

\dmc


Reply
Matt_Edwards
Posts: 2664
(@matt-edwards)
Famed Member
Joined: 18 years ago

DMC, you mentioned you were playing with Arduinos. Well Lookie Lookie at this one http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=290466262069


Reply
dmcole
Posts: 2196
Topic starter
(@dmcole)
Noble Member
Joined: 19 years ago
Matt_Edwards wrote:DMC, you mentioned you were playing with Arduinos. Well Lookie Lookie at this one http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=290466262069

Matt:

Thanks for the link. I had only thought about Rainbowduinos as drivers for those little pixel arrays ... frankly hadn't thought about them for this project.

I don't think I'll be able to use it, as there don't seem to be enough PWM pins (the standard six that come with the Arduino), but for grins I bought one anyway (I bought from a guy in the US who sells them so the shipping will -- may? -- be faster).

Currently, I'm successfully driving all the pins on a TLC5940 with DMX so have 16 channels of PWM -- I don't need 16 channels, but I have them. I'm struggling with getting the source driver to work -- right now, I think it's purely a wiring problem but haven't had time in a week to fiddle with it further.

I'm going to wrestle this sucker to the ground yet.

\dmc


Reply
Posts: 597
(@entropy)
Honorable Member
Joined: 19 years ago
dmcole wrote:Matt:

Thanks for the link. I had only thought about Rainbowduinos as drivers for those little pixel arrays ... frankly hadn't thought about them for this project.

I don't think I'll be able to use it, as there don't seem to be enough PWM pins (the standard six that come with the Arduino), but for grins I bought one anyway (I bought from a guy in the US who sells them so the shipping will -- may? -- be faster).

Currently, I'm successfully driving all the pins on a TLC5940 with DMX so have 16 channels of PWM -- I don't need 16 channels, but I have them. I'm struggling with getting the source driver to work -- right now, I think it's purely a wiring problem but haven't had time in a week to fiddle with it further.

I'm going to wrestle this sucker to the ground yet.

\dmc

Rainbowduino is light on specs for the actual dimming mechanism and I have yet to find actual source code for their dimming code, but it appears that they are doing software PWM and multiplexing, in order to achieve 192 channels (8x24 matrix, which translates to an 8x8 RGB matrix). Bit depth is low though - I think it's only 3 or 4 bits per color channel.


Reply
dmcole
Posts: 2196
Topic starter
(@dmcole)
Noble Member
Joined: 19 years ago
Entropy wrote:Rainbowduino is light on specs for the actual dimming mechanism and I have yet to find actual source code for their dimming code, but it appears that they are doing software PWM and multiplexing, in order to achieve 192 channels (8x24 matrix, which translates to an 8x8 RGB matrix). Bit depth is low though - I think it's only 3 or 4 bits per color channel.

Yes, you're right. I spent a couple of days with first the spec sheet (such as it is and it still isn't current), then probing the code (you can find some here) and finally some time working with the board itself.

Even were I to get it to work, I would have two full sink chips unused and would need to design a shield for the power supply, to handle the RS485 chip and make places for connectors. Combined, it would end up costing at least 1.5-times what I believe the Sawyer board should cost, if not more.

So, another dead end.

I continue to think that my best chance of success lies with a combination of the ATMega328 running the Arduino bootloader, a TLC5940 (driving sink lines) and a UDN2981 (driving source lines). I have had only limited success getting the 5940 and the 2981 to work together (independently, they work great) but I think it will, eventually.

I have found some code that I think will link them together for multiplexing, but it was written by a guy who has the word "grumpy" in his forum handle (and has extensive posts to prove that he's not exaggerating). I'm not holding out much hope on cooperation, but I need to play around with his code a lot more before I approach him about helping me out (well-prepared people seem to get less of the grump than others).

As I keep saying, this project is not dead, but it is certainly taking its time to become alive.

Thanks for all the support.

\dmc


Reply
Posts: 597
(@entropy)
Honorable Member
Joined: 19 years ago

I saw your post over on adafruit - One comment is that the TLC5940 can be a bit difficult to source. Also, it's a lot more expensive than the PCA9635. Unfortunately, the PCA has the disadvantage of requiring more support parts...

I'm not ready to put my DMX-to-PCA9635 code up on github yet (I haven't implemented address programming or multichip support yet, plus I need to do some cleanup. Thanks to a business trip the past three weeks and upcoming events, I don't think I'll be able to touch any of my projects again until October at this point.), but I can tar up what I have so far and email you if you'd like.


Reply
dmcole
Posts: 2196
Topic starter
(@dmcole)
Noble Member
Joined: 19 years ago
Entropy wrote:... but I can tar up what I have so far and email you if you'd like.

I'm PM'ing you.

Thanks.

\dmc


Reply
dmcole
Posts: 2196
Topic starter
(@dmcole)
Noble Member
Joined: 19 years ago

Sawyer Star (LED array) now a 2011 project

Folks:

I came to the conclusion a few days ago that I'm clearly not going to have the Sawyer Star project finished for 2010 -- not even for my own use, no less than something that could have PCBs and a co-op.

I'm sorry that I didn't get this working in time for this year. Despite having spent probably way too much time, I made little progress -- with the exception that I am now much more knowledgeable about how arrays work, overall circuit design and many more baseline microcontroller programming concepts.

I have four distinct versions of schematics drawn, though I doubt that any of them are what the ultimate device is going to look like. I have six breadboards with six different concepts sitting here on the bench and probably only one of them is even close to what the finished board is going to look like.

Nonetheless, I'm not completely discouraged and will restart on this project again after the 2010 show is packed up and put away.

Thanks for everyone's support -- besides all the postings here, there have been a lot of private messages the general public hasn't seen. This group has been great and I'm pretty certain I can get this puppy operational within the first few months of 2011.

\dmc


Reply
Posts: 2541
(@lightup)
Famed Member
Joined: 17 years ago

dmcole:
What are some of the lighting display patterns you were planning to implement on your Sawyer star?

I have collected some 2.5V mini lights (cut from strings) over the years and plan to build a star using parts on hand. Not sure whether to use the Sawyer star or the Bethlehem star layout that Virtus used. First need to collect some display pattern ideas.


Reply
dmcole
Posts: 2196
Topic starter
(@dmcole)
Noble Member
Joined: 19 years ago

LightUp:

I haven't focused much on the patterns, but David Thorpe -- the originator of the idea -- did make a video of his star running the patterns he has made. I've uploaded it to my web site:

http://www.dmcole.net/star.wmv

The video itself is only 3mb and a tiny screen display, but you should get the idea.

My plan is to have the software provide access to the star via four DMX channels (adjustable via the RJ/RPM method of DMX address selection): red, green and blue channels, fully dimmable 0-255, and a fourth channel that would trigger effects, depending upon the dimming command sent on the channel. For example, a dimming command of between 1 and 50 (or between 1 and 20 percent) might put the star into a spinning pattern, while a dimmind command of between 51 and 100 (or 21 to 40 percent) might put the star into a pulsing-in-and-out pattern.

I believe that the underlying controller could be used for a variety of props -- not just the five-point star, but a Bethlehem star, a snowflake or a wreath could all be designed, built and controlled in interesting ways with the circuit. Each prop would share a basic set of code -- the DMX, the RGB dimming -- and then we'd develop a specific set of code for the effects that are special to the specific prop.

But, as the Atlanta Braves are saying, wait until next year.

\dmc


Reply
Page 5 / 6
Share: