New Controller desi...
 
Notifications
Clear all

New Controller design

131 Posts
26 Users
0 Reactions
44.7 K Views
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago
TED wrote:Several of the cable problems described in your summary of the survey results were almost certainly caused by using solid core wire.

Ted, you’ve been saying this for at least five years now, starting right after I made my first CAT5 cables and yes, I used solid core. I agree with you and I’ve been waiting for this failure to occur but I’ll be going on the sixth year of uncoiling and re-coiling these and have yet to experience my first failure. I especially expected that the end that connects to the controller to fail because it gets bent at a fairly short radius at the end when it gets plugged into the controller.

I’ve seen the outer cable casing carefully chewed off by squirrels and have just covered it with more PVC tape. So far they’ve never bitten into the wire itself. I also had one crack when bending it at -10°F and again just covering it with more tape. I should replace these but it’s been kind of an experiment to see how long they actually last. They’ve actually out lived all of my incandescent strings.


Reply
Page 27 / 27
Share: