Another thought that is definately outside my realm of knowledge, what about programming a PIC to sense multiple inputs (one from each GFCI so you don't have to have so many relays) then if one goes low, it would trigger an output on another pin? I think the hardest part of that would be bringing the voltage down to levels the PIC can handle. Would that even be worth investigating?
n8huntsman wrote:Another thought that is definately outside my realm of knowledge, what about programming a PIC to sense multiple inputs (one from each GFCI so you don't have to have so many relays) then if one goes low, it would trigger an output on another pin? I think the hardest part of that would be bringing the voltage down to levels the PIC can handle. Would that even be worth investigating?
i'm no help in this field, i have no idea. I need to study Pics and Micro controllers to know their main tasks and how to manipulate them. creating the voltage at the proper levels shouldn't be hard to achieve
A buddy of mine used some old Koyo direct plc's we scrapped out of retired machines. they had 0-10VDC "anaolg cards".
He took a bunch of amp-clamps he got from Harbor freight ($6/ea if I remember correctly) set for amps- ran display directly to analog inputs.
could program what ever he wanted. The main project was to learn to map buttons for GUI applications and using recycled parts for free....
suppose you could monitor the circuits that way....take snap shots of the varying peak loading supplying the GFCI's...could get all sorts of peak reading data as well as tripped GFCI information .
n8huntsman wrote:Another thought that is definately outside my realm of knowledge, what about programming a PIC to sense multiple inputs (one from each GFCI so you don't have to have so many relays) then if one goes low, it would trigger an output on another pin? I think the hardest part of that would be bringing the voltage down to levels the PIC can handle. Would that even be worth investigating?
Inelegant as far as I'm concerned, but it would work. With a little bit of ingenuity it could be made to work with the H11AA1 optos that Ernie mentioned in an earlier post.
Another way (also using the H11AA1 opto) would be to add an NE555-based missing-pulse detector after the opto. You could connect each opto output to an individual NE555 circuit. Or you wire the H11AA1 outputs in series going to just one missing-pulse-detector, and rely on your eyes to determine which GFCI tripped.
