MiniRen8/4
 
Notifications
Clear all

MiniRen8/4

130 Posts
29 Users
0 Reactions
50.4 K Views
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

So is the Ren8/4 going in the bottom of a TA200 and the RenW in the lid?


Reply
WakeFan
Posts: 733
(@wakefan)
Prominent Member
Joined: 19 years ago

I like it! A little on the costly side I would assume, but still I like it! I've thought several times how it would be nice if my ssr's could be wireless.


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Thanks for the feedback, everybody!!!

The beauty of prototyping is that by definition, nothing's locked-in. First, you "get it to work" and then after that, you try to factor in more safety, convenience, better performance, perhaps ease of construction and of course, low cost. In my case, I also want to make it something the user can build from scratch, including etching the board. I've been working on my etching process for about a year and this is perhaps the most detailed, edge-to-edge quality board I've made to date. And after reading all the helpful comments so far, I've formulated another idea in my head about implementing this whole concept that might knock your socks off, so hang in there. I'll probably have something for everybody to see by next weekend. 😎


Reply
tstraub
Posts: 525
(@tstraub)
Honorable Member
Joined: 18 years ago

Sounds great! I cant wait to see what else you've got coming.

Tyler


Reply
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago
dirknerkle wrote:The trace supplies +5v power to the MOC3023s and I'll have to see if there's another way of getting power to them without having to go to a 2-sided board or putting some top-wires on it.

I’d swap the opto’s outputs. Remember the opto’s TRIAC has no external gate so there’s no difference between MT1 & MT2. I normally put the resistor on the side, partially next to the opto. You may find it more convenient to stand it up on end because of your crowded inner city Real Estate issue.


Reply
Page 3 / 26
Share: