Low-Amp SSR
 
Notifications
Clear all

Low-Amp SSR

37 Posts
15 Users
0 Reactions
25.2 K Views
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Yep, apparently. I tested it with a string of 100 incans (.39A) and it worked fine, so I'd imagine .44A would work, too. The MOC is rated up to 1A but I'd sure keep it less than half of that for a little headroom... And the string of LEDs was 100-ct. How 'bout that?!?!?!

Oh, and it'd be better to move the tracing from beneath the optos, of course... 😆


Reply
Aurbo99
Posts: 2803
(@aurbo99)
Famed Member
Joined: 19 years ago

Thanks Dirk

This straight off/on or does it work with dimming as well?

99% of my current display runs 1 string or Incans or LEDs per channel, dropping off the Triac would save some bucks on a retrofit.


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Works just fine with dimming. In fact, it could conceivably eliminate some of the flickering issues that happen with the bigger triacs.

This was Ernie Horning's idea, by the way -- he's a wizard!!!


Reply
Posts: 283
(@eswets)
Reputable Member
Joined: 18 years ago

are you going to put this in the copper file of the library? I would like to make one to try it. would work good for arches!


Reply
David_AVD
Posts: 991
(@david-avd)
Noble Member
Joined: 17 years ago

Nobody else seems concerned by the lack of LV / HV clearance?


Reply
Page 2 / 8
Share: