Low-Amp SSR
 
Notifications
Clear all

Low-Amp SSR

37 Posts
15 Users
0 Reactions
25.2 K Views
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
[#19509]

Just an experiment so far, but because a single-channel prototype worked fine I thought I'd go the next step and build an 8-channel low-amp A/C ssr. This is a takeoff on Ernie Horning's use of the MOC3023 to control lights directly, eliminating the triacs completely since the MOC alone can apparently handle up to 1A. Obviously it's less expensive and quicker to build. Size: 3.75" x 2"

One sacrifice I had to make was running the A/C power trace beneath the optos. Hated to do that but realistically couldn't come up with another way to do it conveniently on a single-sided board. I reasoned that my plan is to use these with one string of LEDs per channel, so there won't be much current on the board at all and it'll probably work okay. Still, I hated to do it that way because it's a bad idea... I built one and if it tests out, I'll cover the hot traces with either liquid tape or hot glue for more safety and isolation from potential moisture.

I etched 3 boards -- the right two still have the toner on them while the left one is cleaned and ready to assemble. Also shown -- the completed prototype.

DSCI0608
DSCI0609

36 Replies
David_AVD
Posts: 991
(@david-avd)
Noble Member
Joined: 17 years ago

If running tracks under the optos seems like a bad idea, it probably is. :huh:


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
David_AVD wrote:If running tracks under the optos seems like a bad idea, it probably is. :huh:

I couldn't agree with you more, David! Sometimes with a single-sided board you run out of options though... 🙁


Reply
David_AVD
Posts: 991
(@david-avd)
Noble Member
Joined: 17 years ago

Nah, the valid option is don't make it in that case. LOL


Reply
Aurbo99
Posts: 2803
(@aurbo99)
Famed Member
Joined: 19 years ago

hmm, so a single string of LEDS (70 count) rated at .04amps or even a single string of INCANs (70 count) rated at .44 amps will work just fine for this design?


Reply
Page 1 / 8
Share: