Introducing the Pix...
 
Notifications
Clear all

Introducing the Pixel String Controller

25 Posts
8 Users
0 Reactions
12.5 K Views
Materdaddy
Posts: 2368
(@materdaddy)
Famed Member
Joined: 16 years ago
Reply
erm213
Posts: 479
Topic starter
(@erm213)
Honorable Member
Joined: 16 years ago
Materdaddy wrote:Any updates?

Nothing new, this is on the back burner. It won't be ready for this season. There are going to be some design changes, nothing major though.

Erik


Reply
Posts: 2128
(@livermore-dad)
Famed Member
Joined: 16 years ago

I came here with an initial huh? But after reading it I understand.

A quick note, I ran some GE's at 30' to the first node via Cat 5 cable and it worked fine, no heat nothing. So I may get my pixels where I want with the E680 board.

Sure there are drawbacks but i'll find them out this year for sure.

I do see a need for another option that will allow for longer runs and quick Cat 5 type connections (ALA Rainbow floods, Ren48LSD , lots of folks) . But Jim has done great job on these boards. I'm waiting for the e681's now, but I'm going to get some use out of the current 680 that I own.

Tory


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

I *think* that much of the issue with length from controller had more to do with the 3.3v logic from the E680 (w/o fix going into current GB) as seen on the 1809 pixel strips. Adding in a buffer (as on the E681) will probably alleviate much of this IMO. I ran 30' of Cat5 from an E680 with a 74HCT125 driver to 5m of 1809 strip w/o any issues.


Reply
Posts: 2128
(@livermore-dad)
Famed Member
Joined: 16 years ago

Oh ya, need to specify, these are the GE's that I bought a ton of last year.


Reply
Page 3 / 3
Share: