Photo flash strobes
 
Notifications
Clear all

Photo flash strobes

1 Posts
1 Users
0 Reactions
1,369 Views
Matt_Edwards
Posts: 2664
Topic starter
(@matt-edwards)
Famed Member
Joined: 18 years ago
[#15958]

An idea I have been toying with is creating the "Stadium photo flash" effect. To achieve this I am thinking of 16 channels that are turned ON for a very short period in a sort of random pattern.
The interface may be DMX (1ch only) or just a dc in.
For the technical minded, rather than use random numbers, I am thinking of using 8 x 16 bit coded sequences that are cycled when ever the trigger input is ON, or the DMX ch is greater then 128.
The ON time will be short(18-25ms) and the time between flashes will be longer 150 -300 ms.the 16 bit sequence will determine which LED is turned ON. 0 will represent no flash.
Clearly the DMX version has the benefit of 'remembering' the last sequence used.

The strobes themselves are then very 'dumb', run off 12 or 24 volts (so you can have up to 6 LEDs at each flash point,
I am thinking 20 mA LEDs will work fine, and depending how to mount them will give a good 3D effect. Each camera flash will be connected via a single pair of wires.

So what do you think?

If this has already been someone else's idea then I would love to hear of your experience.


Share: