Getting PCB boards ...
 
Notifications
Clear all

Getting PCB boards made?

31 Posts
14 Users
0 Reactions
14.2 K Views
RPM
Posts: 1080
 RPM
(@rpm)
Noble Member
Joined: 19 years ago
smartalec wrote:well we all have idea's an from that turns into testing, then from that you ask everyone else there thoughts, then you fix up your board design.
an hopefully if there's anouth interest, you get to bulk order your boards an share the total cost with other members here.

it Seems Gerber files can be hard to transform into, still trying to learn the video on youtube about eagle software.

Here's some instructions I found some time ago for creating Gerbers in Eagle.
_______________________________________________

Creating Gerber files from EaglePCB for sending for manufacture.

1. Design the PCB, obviously... Run both ERC and DRC with parameters as defined by your manufacturer.

2. Create the drill rack using 'File' -> 'run' -> 'drillcfg.ulp'. Select 'mm' for the dimensions and click OK.


3. Create the Excellon drill data files. Open the 'CAM processor' window and select File/Open/Job and Excellon . Click the 'process job' button to create the drill data.


4. File/Open/Job/ 'gerb274X.cam' job in the 'CAM processor'. Verify that the correct layers are selected for output (go through each of the 5 tabs)
** The 'mirror' option should be deselected on all layers! * Click 'process job'.


5. Verify the generated files using a Gerber file viewer.

The output file formats are:
*.drl = drill list
*.drd = drill data, location of the drill holes
*.cmp = component side metal
*.sol = solder side metal
*.stc = mask stop for component side
*.sts = mask stop for solder side
*.plc = silkscreen for component side.


Reply
Page 4 / 4
Share: