scooter_seh wrote:If anyone has any thoughts or suggestions, please let me know.Thanks,
Scott
Hi Scott,
Have a look at the Zephyr rtos development environment. It is quite good and is cross platform so you can build targets for many different mcu's and boards. https://docs.zephyrproject.org/latest/boards/index.html
The project is an active open source project and part of the linux foundation.
https://www.zephyrproject.org/
https://github.com/zephyrproject-rtos
Happy to help out if you like.
I can't believe I found this incredible thread. This whole project is awesome. It brings me back to why I fell in love with the whole hobby. Great work Scott! I have a question about the BOM's. Digikey is at $140 and I realize that the list is tailored to Digikey. Has anyone used Arrow? I have always found them faster and cheaper, but they may not have all the components. My boards are ordered and I can't wait to put a few together.
scootchu wrote:I can't believe I found this incredible thread. This whole project is awesome. It brings me back to why I fell in love with the whole hobby. Great work Scott! I have a question about the BOM's. Digikey is at $140 and I realize that the list is tailored to Digikey. Has anyone used Arrow? I have always found them faster and cheaper, but they may not have all the components. My boards are ordered and I can't wait to put a few together.
I used digikey, but to save on the BOM I bought the pixel connectors on aliexpress for much much cheaper (3, 2 and 4 pin). This way I have extra for power injection boards and the like.
DrNeutron wrote:I used digikey, but to save on the BOM I bought the pixel connectors on aliexpress for much much cheaper (3, 2 and 4 pin). This way I have extra for power injection boards and the like.
I just went through the motions and transferred everything over to Arrow, and neither have the 5v regulator in stock. You are correct in the connectors being the one of the most expensive parts of the build. Strike that-Arrow had one converter in stock and I bought it. LOL
I built a BBB16 and have PB16 boards coming. Everything seems to be working just fine. I haven't been able to load the eeprom.bin file. It's in the folder, but there's no upload file on the Help-About page on FPP 4.6.1.
Has anyone done it?
