FPP PB16 Pixel Cont...
 
Notifications
Clear all

FPP PB16 Pixel Controller

630 Posts
62 Users
6 Reactions
389.5 K Views
Posts: 447
(@glycerine)
Honorable Member
Joined: 7 years ago
ukewarrior wrote:I use them all the time.
If you want to order a bunch of these, I have panelized it.
You will get over 240 boards for the cost of one $5 PCB order. just tell them to vscore it.
Panel gerbers attached.

:thup:


Reply
Posts: 447
(@glycerine)
Honorable Member
Joined: 7 years ago

By the way, have any of you tried swapping the resistor arrays with a lower value? I watched a video on flicker problems and it was suggested that (on a falcon controller at least) these be switched for something like 33ohm.


Reply
Posts: 120
(@superdave)
Estimable Member
Joined: 13 years ago
Glycerine wrote:By the way, have any of you tried swapping the resistor arrays with a lower value? I watched a video on flicker problems and it was suggested that (on a falcon controller at least) these be switched for something like 33ohm.

You are probably referring to:

...in case others are curious


Reply
rayhjr
Posts: 972
(@rayhjr)
Noble Member
Joined: 12 years ago
Glycerine wrote:By the way, have any of you tried swapping the resistor arrays with a lower value? I watched a video on flicker problems and it was suggested that (on a falcon controller at least) these be switched for something like 33ohm.

Yes Sir. I use 33, or is it 30, anyway, on all my outputs.

Sent from my SM-A505U using Tapatalk

They were 33 ohm. I ordered 25 back in July, .15 cents each, now .32 cents.
https://www.arrow.com/en/products/search?cat=&q=+4608X-102-330LF&r=true


Reply
Posts: 447
(@glycerine)
Honorable Member
Joined: 7 years ago
superdave wrote:You are probably referring to:

...in case others are curious

Yes, that's the one. Thank you.


Reply
Page 58 / 126
Share: