FPP PB16 Pixel Cont...
 
Notifications
Clear all

FPP PB16 Pixel Controller

630 Posts
62 Users
6 Reactions
389.5 K Views
DrNeutron
Posts: 2017
(@drneutron)
Noble Member
Joined: 14 years ago

Just an FYI, I bought all components with exception of the 3 pin connectors from digikey as well.
Found a good store on aliexpress for the connectors if anyone is interested:
https://www.aliexpress.com/item/33029158756.html?spm=a2g0s.9042311.0.0.27424c4d3I407N
Think it was 26$ cdn for 50 plugs and 50 connectors.....
Shipping included.


Reply
Posts: 16
(@curtisfeatures)
Active Member
Joined: 7 years ago
rayhjr wrote:I was not able to find them at Alli either. I thought I had found some 120 ohm 8 pin but they were not set up the way I needed them to be. Instead of being 120 ohm between 2 pins, they were 120 ohm from pin 1 out to any of the other pins. You want isolated not bussed.
When I ask the seller if they had the isolated not the bussed, they had no idea what I was talking about. :angry:
I ended up ordering from DigiKey or Arrow, not sure which.

Ye i was going to try going down that route of asking them but going on past experiences with the Chinese Market place i know better not to go down that rabbit hole.

Think i have found some from a German supplier, got to pay £9 delivery but i will just order a bunch of them at only 9p each. Might even start an Ali express store 😛

How did you find finding the IC chips? Im not electronics expert so i bought the exact model that was on ali express but im not sure if other ones would have worked which looked and sounded the same (minus the exact part number)


Reply
Posts: 16
(@curtisfeatures)
Active Member
Joined: 7 years ago
DrNeutron wrote:Just an FYI, I bought all components with exception of the 3 pin connectors from digikey as well.
Found a good store on aliexpress for the connectors if anyone is interested:
https://www.aliexpress.com/item/33029158756.html?spm=a2g0s.9042311.0.0.27424c4d3I407N
Think it was 26$ cdn for 50 plugs and 50 connectors.....
Shipping included.

These are the connecters that i have previously purchases and used again this time. https://www.aliexpress.com/item/32821396127.html?spm=a2g0s.9042311.0.0.41154c4dQp2skZ


Reply
Posts: 16
(@curtisfeatures)
Active Member
Joined: 7 years ago

Thinking about this further. Is there a reason to use network resisters rather than "traditional" Carbon film ones if they are just going between ports 1-2 3-4 and so on? Is it just for convenience?


Reply
Posts: 237
(@spankyty)
Reputable Member
Joined: 10 years ago
scooter_seh wrote:As an open source software developer, I am a proponent of the open source movement. Because of this, I wanted to develop an open source pixel controller. The FPP PB16 Pixel Controller is the design I came up with. My intent is for the controller to be DIY build it yourself style and it should be easy to hand solder for most people. If you would like to build the controller, you have to get a PCB made (I recommend https://jlcpcb.com/ ) using the 'gerber.zip' file. You then have to order all the parts (minus the PCB) from digikey and Amazon. A full list of bill of materials (PB16_Bom.ods), is included in the github. I made 3D printable CG1500 mounts and included a link below. I have a couple blank PCB's if anyone is interest. If anyone has any feature request and/or design improvements, please let me know.

I have uploaded all the design files to github and created a basic manual and assembly guide.

Features:
Powered by FPP Falcon Player
PocketBeagle based
16 3-Wire pixel ports
700 pixel per output at 40 FPS or 1400 at 20 FPS
2 DMX serial outputs
USB port for ethernet, WIFI, or audio
OLED display
Adafruit real time clock header connector
2 pin GPIO header for push button or relay support
5v - 24v Vin support
Expansion header for additional 16 pixel outputs

Github: https://github.com/computergeek1507/PB_16

CG1500 Mounts: https://www.thingiverse.com/thing:3829508

I. LOVE. IT! Mostly because it is open source! 😀 Thank you!


Reply
Page 54 / 126
Share: