FPP PB16 Pixel Cont...
 
Notifications
Clear all

FPP PB16 Pixel Controller

630 Posts
62 Users
6 Reactions
389.9 K Views
Posts: 447
(@glycerine)
Honorable Member
Joined: 7 years ago
DrNeutron wrote:Nix this.....
I just finished board and loaded FPP.
Once configured it shows 17-20 as its own differential receiver and then a block 21-36 for the expansion.
So, you get the 4 strings on the mainboard plus the 16 strings with expansion.
Awesome!

Good to know. Thanks for the update. I don't have that version of the board, but was still wondering what the answer was!


Reply
Posts: 128
(@sctwohig)
Estimable Member
Joined: 10 years ago
scooter_seh wrote:That should work. I also made a Pi Breakout with a 40 pin Expansion header. This one does require separate power to the Pi in most cases. Pi 2 Expansion Link

Is there an eeprom file for the pi Adapter?

Thanks,
Shawn


Reply
Posts: 1168
(@keith-r)
Noble Member
Joined: 19 years ago

Is there an updated BOM for board v1.0g? I am finally ready to build a couple of these, but never bought the components.


Reply
DrNeutron
Posts: 2018
(@drneutron)
Noble Member
Joined: 14 years ago

https://github.com/computergeek1507/PB_16/tree/master/PB_16v1
Scroll down to PARTS BOM and the .ODS file will be downloaded.
I used it for 1.0e version and went fine, don't see much changing with exception of barrier blocks for power input.


Reply
Posts: 87
Topic starter
(@scooter-seh)
Trusted Member
Joined: 12 years ago

With the FPP 6 license stuff I cannot generate EEPROMs anymore, I upload a JSON file of the pinout that you can send to Chris to generate the EPPROM.

https://github.com/computergeek1507/PB_16/blob/master/Pi_Adapter/Pi_Adapter.json

diy@falconplayer.com

sctwohig wrote:Is there an eeprom file for the pi Adapter?

Thanks,
Shawn


Reply
Page 115 / 126
Share: