First PCB design - ...
 
Notifications
Clear all

First PCB design - request for comments

34 Posts
13 Users
0 Reactions
20.4 K Views
David_AVD
Posts: 991
(@david-avd)
Noble Member
Joined: 17 years ago
ags0000 wrote:It turns out that resistors are really good "free" jumpers across other traces, without any vias or extra pads. I surprised myself with that revelation.

There's lots of tricks when it comes to component and track placement. The learning process never stops though. Practice and perseverance does pay off.;)


Reply
Posts: 844
Topic starter
(@ags0000)
Noble Member
Joined: 16 years ago

Can anyone help shed some light on the reason why every power trace (50 mil instead of 15 mil for signals) results in a DRC violation, saying the drill hole cannot be backed off? How can I fix that? Please refer back to post #17 of this thread:

I have a problem with every power trace (50 mil). Every time I connect power to a pad I get this DRC error: "Track to Drill Hole error (T-D) at (9200 5450) on layer "Top Copper. Track too wide to backoff from drill."

I understand the words, but how can I fix this? Do I need bigger pads for the wider power traces? That will be a big problem.


Reply
Posts: 494
(@tlorek)
Honorable Member
Joined: 18 years ago
Jrd wrote:I believe that's 5V actually but good catch on that connection missing.

Hence my comment about not being an expert!!! 🙂


Reply
mrpackethead
Posts: 2289
(@mrpackethead)
Famed Member
Joined: 19 years ago
David_AVD wrote:You don't Andrew. A DRC is applied to the PCB. Such a n00b ! LOL

Its not ok, to call me a Noob.


Reply
Page 4 / 4
Share: