Finally Affortable ...
 
Notifications
Clear all

Finally Affortable Snowfall Tubes (FAST)

448 Posts
68 Users
0 Reactions
262.9 K Views
Posts: 86
(@airsouth)
Estimable Member
Joined: 16 years ago

So, I almost didn't post a reply here due to the nature of the mistake, but I figured if there's ever anyone else who comes across this same problem, it may help them. Turns out it was in my layout on the breadboard. I wired the LEDs up common cathode. Switched the circuits around for the LEDs and they were working as intended. Silly mistake. Now to fool around with the random version of the firmware to get it to slow way down. It's going pretty fast for me, but it's probably because I'm only testing with 7 LED's. Thank you everyone for your time, help and input. I'm sure I will have more questions along the way.


Reply
chelmuth
Posts: 1077
Topic starter
(@chelmuth)
Noble Member
Joined: 16 years ago

I was just reading through all of this and the first thing that came to mind was wiring problem. When you cross wires or turn LEDs around the charlieplexing has a field day. Glad you were able to work it out. I'm amazed every time I get an email and people are still talking about these. Feels great even though I was barely able to code this thing it worked for a lot of people's purposes. Have a great day all.


Reply
Posts: 86
(@airsouth)
Estimable Member
Joined: 16 years ago

I was curious if anyone happened to know about the cheap knockoff A/C USB cubes like the ones that come with the iPhone. The one I have supplies 5V @ 1A. I'm not sure on the mechanics that make these work since they are so much smaller than a typical wall wart, but does anyone think that these would hold up as a reliable 5V converter or do you think they would wear out quickly?

You can get these things for $0.40 or less if you order larger quantities, so it makes me curious if these things would work.


Reply
Posts: 86
(@airsouth)
Estimable Member
Joined: 16 years ago

I have a question. When I run this on 5V without the resistors, I start to get some strange behavior with the lights. I was thinking, well I would just be pushing a little more to the lights and burn them out faster (which doesn't matter because I'm using old test lights), but I'm actually getting 3 lighting up at the same time. Is that a byproduct of the charlieplexing and forward voltage getting pushed through the LED's?


Reply
Posts: 86
(@airsouth)
Estimable Member
Joined: 16 years ago

Good read here for understanding the basics, benefits and limitations of charlieplexing - http://pcbheaven.com/wikipages/Charlieplexing/
Turns out that was exactly what it was. There were 3 LEDs that were forward biased and with the full 5V going to them, 2.5V was enough to light up each of the other two lights in the circuit.


Reply
Page 79 / 90
Share: