airsouth wrote:I was curious if anyone happened to know about the cheap knockoff A/C USB cubes like the ones that come with the iPhone. The one I have supplies 5V @ 1A. I'm not sure on the mechanics that make these work since they are so much smaller than a typical wall wart, but does anyone think that these would hold up as a reliable 5V converter or do you think they would wear out quickly?You can get these things for $0.40 or less if you order larger quantities, so it makes me curious if these things would work.
I've used these things for 2-3 years with no problems at all. I buy them at our local gas station for about 65 cents. They have some that are for an iPad which are good for 2.1 amps for 99 cents. If you use these be sure to get a heavy duty USB cable. Some of the cables are only 26 or 28 gauge and probably not a good idea depending on your current requirements.
dvc2013 wrote:I've used these things for 2-3 years with no problems at all. I buy them at our local gas station for about 65 cents. They have some that are for an iPad which are good for 2.1 amps for 99 cents. If you use these be sure to get a heavy duty USB cable. Some of the cables are only 26 or 28 gauge and probably not a good idea depending on your current requirements.
Awesome. Thank you! That will save me lots of time and money!
I have even taken the case off of a couple of these so I could add two resistors to get a zero cross signal for a small controller I built.
Heldwhat Christmas wrote:I always assume you are the expert. :biggrin:Ever since you helped me with the FAST code when I extended it for running 6 feet long tubes. (here)
You are right though... I should have referred to Cory.
I have a quick question, after looking through all 40 pages of this thread, and it has to do with the above post.
The code can be changed to allow for a longer snowfall tube, but how do you, or what do you change if you want to do shorter snowfall tubes? Say, ones that are 2 segments or 3 segments long instead of the normal 4? I showed these things to my wife and she commented that it would look cool if you could make them different lengths, much like icicles (she doesn't understand why these are called "snowfall" tubes and not icicle tubes).
Can someone help me out on this? I haven't ordered any of the controller or segment boards yet, and I don't have a Pickit 2/3 programmer device -- I can assume I need to order or build one?
Stormyblade wrote:I have a quick question, after looking through all 40 pages of this thread, and it has to do with the above post.The code can be changed to allow for a longer snowfall tube, but how do you, or what do you change if you want to do shorter snowfall tubes? Say, ones that are 2 segments or 3 segments long instead of the normal 4? I showed these things to my wife and she commented that it would look cool if you could make them different lengths, much like icicles (she doesn't understand why these are called "snowfall" tubes and not icicle tubes).
Can someone help me out on this? I haven't ordered any of the controller or segment boards yet, and I don't have a Pickit 2/3 programmer device -- I can assume I need to order or build one?
There is a line in the code where you can set how many LEDs you actually have.
movlw d'56'
movwf fall_count ;######## Set number of LEDs attached to controller ie. 3 segments = 21
incf fall_count, 1 ;Was easier than explaining add 1 to LED count.
Here the d'56' accounts for 56 LEDs or 8 segments of 7 (4 segments of 14). If you wanted to have one with 3 segments as in the example in the comment above, you would set the line to:
movelw d'21'
If you haven't looked through the wiki yet, that is a great source for just about all the info you will need as well: http://www.doityourselfchristmas.com/wiki/index.php?title=FAST_Finally_Affordable_Snowfall_Tube
