P. Short wrote:I didn't write that code, nor have I worked with it, so I don't consider myself the expert here.
I always assume you are the expert. :biggrin:
Ever since you helped me with the FAST code when I extended it for running 6 feet long tubes. (here)
You are right though... I should have referred to Cory.
Heldwhat Christmas wrote:You have to change the 56 on both lines (it should be a couple lines above that one.
Are you trying to do something customer with the code?
Can you confirm what version of the code you are using? The one I have has the following comment:
; Sep-26-2011 : Fixed bug that caused fall to not start at top if you selected LED's less than 56..
I'm using the one from the wiki with the 20110813 tag at the end, so I'm guessing it was Aug 13, 2011 (FAST_Snowfall_Tube_With_Tail_(Random)_20110813_.asm). Where did you get the update from?
------------EDITED ---------It is the same version.----------------
I've tried changing both lines to no avail. If there's a more recent version, than this may fix the issue. I'll have more time to play with it later and see what is going on.
My work on this was designing the LEDancer PCB and firmware, as well as the LED 'sticks'.
airsouth wrote:I'm using the one from the wiki with the 20110813 tag at the end, so I'm guessing it was Aug 13, 2011 (FAST_Snowfall_Tube_With_Tail_(Random)_20110813_.asm). Where did you get the update from?I've tried changing both lines to no avail. If there's a more recent version, than this may fix the issue.
After looking at the comments at the top, it is the version with the Sep-26-2011 update, I guess the file name just wasn't updated.
If I change both '56' values to '7', then LED #7 blinks off and on constantly with nothing else going on. I'll have to tinker around with it later tonight to see if I can figure out what is going on here. Obviously it is something I'm doing or not doing because many others have gotten it to work.
