Nice drawing. The placement of the pin 1 indicator on the Phil Segments is a bit unfortunate but your drawing sure helps!! Kirk
Yes, I tried to make a photo that would show it clearly and when I couldn't, I said, "Hey, didn't you used to make info-graphics for newspapers for a living?" I then answered myself by making a diagram.
\dmc
PS: Actually, I'm not an info-graphics artist, but I did have that as one part of my job for about 18 months in the mid-1980s.
hi all,
I downloaded the .asm file for the fast the other night, tryed to compile it an i get a list of errors about 20 of them (approx) , downloaded from the wiki
is there a easy fix to tell me to edit a certain line or something?
im not that good with code, but i do know how to load a asm file an compile it (ren64 an ren48)
please help me (if i can be helped)
thanks in advance
alec
#1 - I think I saw something in one of the threads already, about versions of compilers and asm code.
#2 - I think it would help if you posted some of the actual errors. That will assist in identifying the problem.
Also make sure that the Pic16F688 is your target device. Having something else can cause errors.
Erik
the errors in the first few lines are
Error[152] C:\NEW FOLDER\FAST TUBES\FAST_WITH_TAIL_(MODULAR_WIRING)_20110804.ASM 41 : Executable code and data must be defined in an appropriate sectionMessage[302] C:\NEW FOLDER\FAST TUBES\FAST_WITH_TAIL_(MODULAR_WIRING)_20110804.ASM 42 : Register in operand not in bank 0. Ensure that bank bits are correct.Error[152] C:\NEW FOLDER\FAST TUBES\FAST_WITH_TAIL_(MODULAR_WIRING)_20110804.ASM 42 : Executable code and data must be defined in an appropriate section
then errors 152,151,150
but mainly error 152 for every line
please help my silly mistake
{mplab v8.70}
{pickit 3}
{firmware suite v 01.26.56}
hope that helps
Can't look too closely at the moment.. but the discussion about mplab and versions was in/around this link:
Hope you find your answer.. I might get time tonight to poke a bit as well.
You need to add a CODE directive for the newer compilers at the beginning of the file. It is in the FAST thread- I found the same thing using the X version of mplab and discovered that "fix". You then need to ignore the warnings because the code DOES work even witht he warnings.
After spending a couple of hr's looking for something i have no idea with, even google does'nt help,
ive come to the conclusion i brought something from a coop that does'nt work..
it wont build cause of all the errors.
ive compiled it the same way i have done the 'ren48lsd' , 'ren64' , 'ACL strobe' , 'Wjohn 3ch dmx'
how can someone say this code works with over 100 errors stopping it from compiling?
Is there a line i need to change?
or does this code not work? i have tryed all the FAST .asm files an they all come with 100+ errors
Please Help, this is driving me crazy
Alec
smartalec wrote:After spending a couple of hr's looking for something i have no idea with, even google does'nt help,
ive come to the conclusion i brought something from a coop that does'nt work..
it wont build cause of all the errors.
ive compiled it the same way i have done the 'ren48lsd' , 'ren64' , 'ACL strobe' , 'Wjohn 3ch dmx'
how can someone say this code works with over 100 errors stopping it from compiling?Is there a line i need to change?
or does this code not work? i have tryed all the FAST .asm files an they all come with 100+ errorsPlease Help, this is driving me crazy
Alec
It works, I just downloaded all 3 ASM files from the WIKI and build them. Here are the steps I took.
- Open MPLab
- Select the Configure->Select Device Menu
- Make sure the PIC16F688 is selected
- Select the File->Open menu option, navigate to the asm file, and click OK
- Select the Project->Quick Build FAST_With_Tail_(Modular_Wiring)_20110804.asm (or whichever asm file you want)
At this point, the code builds, I get a few **Warnings** but no errors.
The fast tubes do work, if you can not get them to compile, there probably is a setting or configuration option that needs to be changed. People are saying the code works, because they are not getting the errors that you are getting.
Hope this helps.
Erik
